will 15 inch wheels fit over 300mm discs

preludemanh22 · Post by **preludemanh22** » Mon Oct 26, 2015 10:48 am

looking to remove my 17 inch alloys for 15 inch just not sure ill be able to use 300mm discs any help will be appreciated

Post by **Merlin** » Mon Oct 26, 2015 11:06 am

No a 15" wheel will not go over 300mm discs and calipers. You need a 16" wheel to clear the brakes. 15" wheels are fine for the OEM 282mm discs and OEM calipers.

preludemanh22 · Post by **preludemanh22** » Mon Oct 26, 2015 12:04 pm

Thanks for that I can just use the accord calipers with 282's then

Post by **Merlin** » Mon Oct 26, 2015 12:05 pm

You can but there isn't much improvement over the OEM calipers, if any.

preludemanh22 · Post by **preludemanh22** » Mon Oct 26, 2015 1:48 pm

16 inch wheels it is then

Post by **Merlin** » Mon Oct 26, 2015 1:54 pm

My full ATR brake setup with 17" wheels on my 5th gen.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Mon Nov 02, 2015 5:17 pm

any excuse to show off...

Lisa's lude has ATR calipers on original carriers/discs and when I changed them over, I did notice a different feel in the pedal and the bite. No particular difference in absolute performance though, as Merlin says.

Post by **Merlin** » Mon Nov 02, 2015 8:50 pm

How was it on the forum that just recently redrilled the ATR discs to 4x114?

preludemanh22 · Post by **preludemanh22** » Mon Nov 02, 2015 10:44 pm

Merlin wrote:How was it on the forum that just recently redrilled the ATR discs to 4x114?

id like to no as ill be doing this

nitin_s1 · Post by **nitin_s1** » Tue Nov 03, 2015 7:13 am

Not sure but Liam re-drilled 300mm (Ep3) discs to fit his 4 stud 4G..