best way to remove rust spot's off stainless manifold

preludemanh22 · Post by **preludemanh22** » Sat Nov 02, 2013 10:44 am

had my manifold bead blasted it's been hanging around in the garage

anyone point me in the right direction ? THANKS.

picture's

mills · Post by **mills** » Sat Nov 02, 2013 10:49 am

Looks

you could try a bit of autosol

preludemanh22 · Post by **preludemanh22** » Sat Nov 02, 2013 10:56 am

that could be a good option

just dont want to mess it up

Post by **SPYDOR** » Sun Nov 03, 2013 2:56 pm

Unless it has a special coating then Autosol's Metal Polish sounds like a good idea. Should blend in after airing for a few days.

That fanimold does look good, shiny welding, oooh!

BMCC · Post by **BMCC** » Mon Nov 04, 2013 8:20 am

You could use :

http://www.halfords.com/webapp/wcs/stor ... yId_165594

Polished my valve cover with one of these.

Post by **lewd lude lover** » Mon Nov 04, 2013 9:42 am

dont think he wants to polish it. just remove the rust spots.

BMCC · Post by **BMCC** » Mon Nov 04, 2013 12:09 pm

lewd lude lover wrote:dont think he wants to polish it. just remove the rust spots.

Sure but to remove the rust your going to have to polish it a bit. One of the compounds is a slightly agressive cutting compound so it should remove the rust spots fairly easily, if you want to get a good shine you could use the other compounds.

It more expensive than autosol but if you do it right it will remove those spots permenantly as some of the metal has to be removed otherwise the rust will just bubble back up. You need to get to good clean metal again. The cutting compound will do this.

Post by **SPYDOR** » Mon Nov 04, 2013 3:10 pm

Nice, must get one of these metal polishing pads sometime as they can work wonders

Lude Generation

best way to remove rust spot's off stainless manifold

best way to remove rust spot's off stainless manifold

Re: best way to remove rust spot's off stainless manifold