No heat in my lude

hondansxr · Post by **hondansxr** » Mon Nov 09, 2015 11:06 pm

check see if the cable is moving the heater control in the engine bay

Post by **Merlin** » Tue Nov 10, 2015 9:08 am

^^ Yup I'd check that first. UK cars have a cable that moves the hot water valve. JDM imports have an electronic controlled value. You need to go in the engine bay and have a look where the pipe go through the firewall. They are in the worst place possible, right behind the engine.

Post by **Merlin** » Tue Nov 10, 2015 9:13 am

Merged threads.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Tue Nov 10, 2015 11:07 am

that (part) explains my reply appearing out of sequence

(although I did also actually write it earlier than the time stamp of the post, shows - I was mobile at the time though and being interrupted on my phone, so I think it didn't send straight away...) When I replied, the thread was blank and it was a straight reply to how easy it is to flush the matrix

blockh3ad · Post by **blockh3ad** » Tue Nov 10, 2015 6:09 pm

Engine gets to temp as it should heater does not

blockh3ad · Post by **blockh3ad** » Tue Nov 10, 2015 6:15 pm

Engine gets to temp as it should

blockh3ad · Post by **blockh3ad** » Mon Nov 16, 2015 6:43 pm

Cheers newkid it was a sticky vacum that operates the heater valve

blockh3ad · Post by **blockh3ad** » Mon Nov 23, 2015 7:55 pm

I need a bit of help can't find the right heater valve unit for my lude. My control panel has buttons no sliders and a digital display the valve is operated by vacum anybody now what I'm talking about

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Mon Nov 23, 2015 8:15 pm

Yep.
That's the heater type fitted to all jdm ludes. So that part of a ukdm no good to you, but off any jdm (import) lude will be fine.

blockh3ad · Post by **blockh3ad** » Mon Nov 23, 2015 8:32 pm

What sort of price am I looking at