inner cv joint replacement

Post by **Vtecmec** » Sat Apr 18, 2015 8:23 pm

Yes, it is. The drain hole is lower down on the other side of the shaft.

Bludge · Post by **Bludge** » Sat Apr 18, 2015 8:26 pm

Sweet, thanks again mate! gonna have another go on monday!

bb1boy · Post by **bb1boy** » Thu Apr 23, 2015 9:55 pm

Double check you put those stupid square bearings back in exactly the right way round or you'll regret it mate..

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Thu Apr 23, 2015 10:06 pm

Mec, there is no way that can be your pic of the fill plug...
The box is dirty!!

And yep bludge, the driveshafts just lever out. Try to lever them evenly from 2 opposite sides at once, that's the surest way of making sure the pop out with minimum effort.

Post by **Vtecmec** » Thu Apr 23, 2015 11:02 pm

wurlycorner wrote:Mec, there is no way that can be your pic of the fill plug...
The box is dirty!!

Ha, that's the old box.