2.2 Exhaust Manifold

Post by **Merlin** » Wed Dec 17, 2014 9:02 am

MaccaIRL wrote:My tuner told me the ATR one is one of the best as it allows better airflow.

The ATR manifold is only slightly larger than the Ludes once you remove the outer skin and may require a notch in one of the front bars. Are you sure he wasn't on about the ATR intake manifold? Rather than exhaust manifold?

@3rd gen steve has an OEM 5th gen manifold and downpipe he is not using and would probably let go on the cheap. Although it does need some work at the flexi pipe.

MaccaIRL · Post by **MaccaIRL** » Wed Dec 17, 2014 12:05 pm

Maybe it was lol. Keep forgetting therws an inlet mani haha

Was told the DC sports one is the same tho?

Post by **Merlin** » Wed Dec 17, 2014 12:19 pm

MaccaIRL wrote:Was told the DC sports one is the same tho?

Same as what?

Post by **NafemanNathan** » Wed Dec 17, 2014 1:26 pm

hoppi05 wrote:Thanks again, now the downpipe length etc is a point of contention as we truly would not know this until it is all fitted? Based on the kit the b16 system would be the correct length so a standard h22 oem or performance exhaust would need to be modified? If you could get a generic price from your fabricator that would be great.

Going from what you've said here, is this to go in your DelSol H22a conversion?

hoppi05 · Post by **hoppi05** » Wed Dec 17, 2014 1:32 pm

yes it is buddy. the kit we use should sit the engine in the correct B16 position so a H22 manifold altered to the same length of the B16 should fit however the proof will be in the pudding there??

Post by **NafemanNathan** » Wed Dec 17, 2014 1:39 pm

In that instance you might as well go custom on the downpipe anyway, if you'd have to cut'n'shut a bought one.

Ie. But that DC Sports manifold relatively cheaply due to the fact it's incomplete and then put your savings towards the downpipe fabrication.

hoppi05 · Post by **hoppi05** » Wed Dec 17, 2014 1:42 pm

good shout nathan i will bear it in mind hopefully i will get somewhere with it this weekend to back this thread up if not at least the following weekend...

MaccaIRL · Post by **MaccaIRL** » Wed Dec 17, 2014 1:51 pm

Merlin wrote:
MaccaIRL wrote:Was told the DC sports one is the same tho?
Same as what?

Was told its the same as the ATR one so the gains would be minimal?

Maybe i read it wrong lol

mercutio · Post by **mercutio** » Wed Dec 17, 2014 6:09 pm

most of the ebay specials are a copy of the dc sports manifold but not made as well or with the same thickness of steel the Atr intake manifold is has basically been copied by skunk2 or is very similar in design.
The Atr exhaust manifold isn't a copy of anything except maybe the jdm prelude manifold

which is a very good exhaust manifold except for the fact its not stainless

MaccaIRL · Post by **MaccaIRL** » Wed Dec 17, 2014 6:43 pm

I dno lol

The one i have is this

Lude Generation

2.2 Exhaust Manifold

Re: 2.2 Exhaust Manifold

Re: 2.2 Exhaust Manifold

Re: 2.2 Exhaust Manifold