
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

My new BB1 lude
- Bri
- Posts: 923
- Joined: Thu Aug 05, 2010 10:33 pm
- My Generation: 4G
- PSN GamerTag: funky_bri
- Location: Wrexham area
Re: My new BB1 lude
Got them buddy, jesus I didnt realise there were so many
Thanks mart once again, you are a top bloke




- Bri
- Posts: 923
- Joined: Thu Aug 05, 2010 10:33 pm
- My Generation: 4G
- PSN GamerTag: funky_bri
- Location: Wrexham area
Re: My new BB1 lude
Me too Dan, thanks very very much for your helpDrax wrote:Bri wrote: Boot spoiler not fitted yet because it needs paint after an accident I had with it, like forgetting its not fixed to the car and driving down the road.![]()
![]()
![]()
glad it got through the mot bri.

Thanks Kezz, Im looking forward to getting rid of any glitches and getting stuck into the cosmetics, Realy looking forward to it

- Bri
- Posts: 923
- Joined: Thu Aug 05, 2010 10:33 pm
- My Generation: 4G
- PSN GamerTag: funky_bri
- Location: Wrexham area
Re: My new BB1 lude
4WS fixed
new dizzy cap
new rotor arm
new fuel filter
timing checked
All lights out on my dash now and its feeling good
Still got a bad flat spot so this weekend the inlet is coming off and my spare going on. It still whistles on tickover so it has to be because of the air leak. If it were the coil pack or the injectors the flat spots would be more obvious across the rev range right?
Got a few other things planned in coming weeks too.
new dizzy cap
new rotor arm
new fuel filter
timing checked
All lights out on my dash now and its feeling good

Still got a bad flat spot so this weekend the inlet is coming off and my spare going on. It still whistles on tickover so it has to be because of the air leak. If it were the coil pack or the injectors the flat spots would be more obvious across the rev range right?
Got a few other things planned in coming weeks too.

- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
you could spray some wd40 where you think your hearing the whistle
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens![]()
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html
- Bri
- Posts: 923
- Joined: Thu Aug 05, 2010 10:33 pm
- My Generation: 4G
- PSN GamerTag: funky_bri
- Location: Wrexham area
Re: My new BB1 lude
not a bad idea its down below fitv valve, had that off and resealed it, also changed throttle position sensor, I think Im just going to order me an inlet gasket and change the whole dam lot.