Stock BB1 Exhaust

Post by **NafemanNathan** » Tue Nov 13, 2012 10:47 pm

giblet wrote:Any idea what size the pipework on the stock backbox is? Might just keep the centre section from the Japspeed on at the mo and swap the backbox over. Should be quieter than it is now surely.

ID of it is a fraction under 2" bud.

giblet · Post by **giblet** » Wed Nov 14, 2012 5:28 pm

NafemanNathan wrote:
giblet wrote:Any idea what size the pipework on the stock backbox is? Might just keep the centre section from the Japspeed on at the mo and swap the backbox over. Should be quieter than it is now surely.
ID of it is a fraction under 2" bud.

Cheers, I'll try and measure the current exhaust tomorrow and then get back to you. How much are you after for it?

Post by **NafemanNathan** » Wed Nov 14, 2012 5:39 pm

£20 plus postage?

When I picked it up yesterday you can hear there's a small amount of rust in it, but it's not that bad at all compared to some I've heard. I took some pictures of it last night, so I'll up load them later. Looks in good condition. it's just the crome tail pipe covers that have corroded slightly, but look like they could clean up.

giblet · Post by **giblet** » Thu Nov 15, 2012 5:58 pm

Any luck with the pics? Going by the Japspeed website my exhaust is "2 1/4 Inch (57mm) bore all the way through from the cat back" so not 100% sure if it will fit but worth a try I suppose.

Post by **NafemanNathan** » Thu Nov 15, 2012 9:02 pm

I did bud. Was waiting to see if it would work for you

I wouldn't recommend it if yours is 2.25" though bud.

Here's the pics anyway...

giblet · Post by **giblet** » Thu Nov 15, 2012 10:19 pm

NafemanNathan wrote:I did bud. Was waiting to see if it would work for you

I wouldn't recommend it if yours is 2.25" though bud.

Damn, thanks anyway. I'll see if I can hunt down a mid section from somewhere and then give you a shout

Post by **NafemanNathan** » Fri Nov 16, 2012 7:44 am

No worries bud

Bri · Post by **Bri** » Fri Nov 16, 2012 4:55 pm

yeah thats in loads better nick than mine.

giblet · Post by **giblet** » Fri Jan 04, 2013 8:11 pm

Still on the hunt for a stock midsection and backbox. Growing rather tired of the shitty japspeed fartcan on the car, even with the silencer bung. Anyone?

Post by **NafemanNathan** » Fri Jan 04, 2013 8:28 pm

Well I've still got that backbox if you can find a mid section.