
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Nathan's Road-Legal/Track BB4
Tell us all about your Lude, you know you want to ...
Pushki
- Ted
- Posts: 2765
- Joined: Sat Jan 18, 2014 5:44 pm
- My Generation: 4G
- Location: about 26 miles away from where I was
- Been thanked: 3 times
Post by Ted » Fri Nov 16, 2012 7:39 am
Sorry lads I have to agree, I tried a set of something similar on the pickup prior to painting it and decided they looked like they should be on a supra. (That's what they were off actually) a bit wider than these but a better fit but just as ill suited. Look like you got something to hide, like rotten arches.Pushki wrote:Do you really, honestly think Vlad's motor looks better with those things stuck on it?

if it aint broke don't fix it https://www.facebook.com/pages/tram-roa ... 8502699270
Ted
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
Re: Nathan's Road-Legal/Track/Show BB4
Post by NafemanNathan » Fri Nov 16, 2012 8:17 am
If this is done right, like I'm planning to do and I'm sure Vlad is to, then it's not going to look like you're simply just hiding rotten arches
I do agree that's Vlad's car as it is is too clean and doesn't look right with black arches, but he's already expressed that he knows what else is required to pull it off. It's all about your imagination and thinking outside the box at the end of the day. Not saying you guys that don't like the idea don't have any imagination before you say anything
Especially you Ted
I'm confident that mine will look the dogs when done. It's not like the rest of my car is OEM. I'm running a much deeper front lip, sides and rear spats and/or rear diffuser, so to me wider arches are almost the obvious next step, especially as I want to widen my broken suspension look.
You can't deny this doesn't look the tits! But look how over exaggerated those arches are!...

That's very similar to the impact I want to achieve, mine just doesn't need to be quite so drift orientated



I'm confident that mine will look the dogs when done. It's not like the rest of my car is OEM. I'm running a much deeper front lip, sides and rear spats and/or rear diffuser, so to me wider arches are almost the obvious next step, especially as I want to widen my broken suspension look.
You can't deny this doesn't look the tits! But look how over exaggerated those arches are!...

That's very similar to the impact I want to achieve, mine just doesn't need to be quite so drift orientated

NafemanNathan
- Ted
- Posts: 2765
- Joined: Sat Jan 18, 2014 5:44 pm
- My Generation: 4G
- Location: about 26 miles away from where I was
- Been thanked: 3 times
Post by Ted » Fri Nov 16, 2012 9:34 am
i agree that the correct arch will look the dogs and i like the car above and i'm still looking for a suited set myself . i love these below but they are too big, i think the shape is spot on to blend with a 4th's front wings if they were cut down but not the rear so im still looking for the right ones, maybe cut down escort front for the front and rear of a 4th

with the top of the wide arch sunk in to the wing it would be about level with the bonnet rather than just sticking out off the car. its hard to explain what i mean really we're back to that imagination and as you know i have a good 1 of them


with the top of the wide arch sunk in to the wing it would be about level with the bonnet rather than just sticking out off the car. its hard to explain what i mean really we're back to that imagination and as you know i have a good 1 of them

if it aint broke don't fix it https://www.facebook.com/pages/tram-roa ... 8502699270
Ted
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
Re: Nathan's Road-Legal/Track/Show BB4
Post by NafemanNathan » Fri Nov 16, 2012 9:55 am
See I never like arches like that. They're just too "bubbley" in my eyes. I know the 4th gen is curvacious, but it's not bubbley and it does have edges... Namely on the existing wheel arches. The Bunny Rocket style ones would work really well as they have flat faces on the edge. I did think about using an SX Bunny Rocket kit, but with the price of them (and not many second hand kit coming about and even them being crazy money), it's not really something I can just buy and try 

NafemanNathan
- Pushki
- Supporter 2015
- Posts: 2635
- Joined: Sat Aug 07, 2010 9:21 pm
- My Generation: 4G
- PSN GamerTag: Luigi_Black
- Location: Bluff Creek
- Has thanked: 2 times
- Been thanked: 10 times
Post by Pushki » Fri Nov 16, 2012 2:18 pm
I agree that you may be able to pull it off Nafe as your car is a bit 'Frankenstein' anyway. No offence.
Vlad's car is so clean and beautiful in its natural state, it would be sacrilege to ruin it like this.
He may as well go the whole hog and stick those eBay batmobile bumpers on it with a huge gay spoiler.

Vlad's car is so clean and beautiful in its natural state, it would be sacrilege to ruin it like this.
He may as well go the whole hog and stick those eBay batmobile bumpers on it with a huge gay spoiler.

Pushki
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
Re: Nathan's Road-Legal/Track/Show BB4
Post by NafemanNathan » Fri Nov 16, 2012 2:27 pm
As long as there's one pristine Sebring Silver Standard OEM 4th gen Prelude in existance, that's all that matters Pushki 
And no offence taken

And no offence taken

NafemanNathan
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
Post by mercutio » Fri Nov 16, 2012 2:28 pm
if your gonna go wide do it properly and have the whole body widened with metal get the lines of the car exagerated with metal.
i have often thought about those arches but never thought they would look good on the lude this confirms it for me i am afraid
i have often thought about those arches but never thought they would look good on the lude this confirms it for me i am afraid
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens![]()
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html
mercutio
- NafemanNathan
- LotM Winner
- Posts: 20144
- Joined: Sun Aug 08, 2010 9:37 pm
- My Generation: 0G
- Location: Yeovil, Somerset
- Has thanked: 8 times
- Been thanked: 124 times
Re: Nathan's Road-Legal/Track/Show BB4
Post by NafemanNathan » Fri Nov 16, 2012 2:31 pm
Yeah that really doesn't float my boat



NafemanNathan
- vlad
- Posts: 79
- Joined: Mon Nov 12, 2012 5:45 pm
- My Generation: 4G
- Location: Wroclaw / Poland
- Contact:
Post by vlad » Fri Nov 16, 2012 4:38 pm

Don't worry Pushki, i am planning of going much deeper with what i am planning... fender flares are just the beginning. Next step are wheels wide enough to fill these arches, with slick tyres, then - lightened fibreglass/CF hood, trunk, then front air splitter under front bumper, rear air diffuser, canards, rollcage in the car, and... especially for you, an addition - huuuge typical time attack wing to make this all a perfect batmobile car !

and after all these mods car should go in a direction similar to this on these photos below



we call it Time Attack style, i understand it's hard to understad it, you either love it or hate it... me and Nathan are rather the ones who love it

vlad
Jump to
- Lude Generation
- ↳ Site Features / Announcements
- ↳ Suggestion / Site Problems
- ↳ Archive
- ↳ Registration Issues
- Members
- ↳ New Members
- ↳ Lude of the Month
- ↳ Archive
- ↳ Lude Profiles
- ↳ Gone but not forgotten
- ↳ Non-Lude Profiles
- ↳ Spotted
- General
- ↳ General Chat
- ↳ Look What I Found!
- ↳ Events
- ↳ Event Pics
- ↳ Calendar
- ↳ Scotland
- ↳ Wales
- ↳ England (North)
- ↳ England (Southeast)
- ↳ England (Southwest)
- ↳ External Links
- Technical
- ↳ Guides / How to's / Tech Section
- ↳ Knowledge Base
- ↳ Engine / GearBox
- ↳ Wiki-Lude
- ↳ Tuning
- ↳ Chassis / Brakes / Steering / Wheels
- ↳ Wiki-Lude
- ↳ Body Work / Detailing
- ↳ Wiki-Lude
- ↳ Electrical / Lights / ICE
- ↳ Wiki-Lude
- ↳ Interior
- ↳ Wiki-Lude
- Traders, Buying and Selling
- ↳ Cars for sale
- ↳ Parts for sale
- ↳ Sales Archive
- ↳ Cars Breaking
- ↳ Group Buys
- ↳ Wanted
- ↳ eBay
- ↳ Special Offers & Recommendations
- ↳ RockAuto
- ↳ Performance Autoworks
- ↳ Opie Oils
- ↳ Nimbus Motorsport
- ↳ 4speed
- ↳ T7Design
- ↳ Competition Clutch
- ↳ TDC Automotive
- ↳ H-Tune
- ↳ Phoenix Close
- ↳ Members' Businesses
- ↳ Insurers
- ↳ Chris Knott Insurance
- ↳ Adrian Flux Insurance
- ↳ Prestige Keep Moving Car Insurance Scheme
- ↳ Sky Insurance
- ↳ Greenlight Insurance
- ↳ Honda Tuner Magazine
- Other Hondas
- ↳ S2000
- ↳ Accord
- ↳ Integra
- ↳ Civic