Vlad's SiR-T TimeAttack Build

vlad · Post by **vlad** » Tue Nov 13, 2012 8:42 pm

newkid wrote:What was all done to the old engine to give the 240

The engine was fully rebuilt, new rings, gaskets and etc... it had a custom intake manifold (much bigger, with no EGR, no IAB), DC sports short ram air intake, h22a7 head ported in/ex, polished, with oversized channels matching the intake, h22a7 cams, 390cc injectors, adjustable cam gears, custom exhaust manifold and custom exhaust 2.5" and of course it was tuned with p28 ecu - we tuned it on dyno to get best results while adjusting cam gears as well... all the intake and exhaust pipes were isolated with insulating wraps, to get the lowest temperatures under the hood that it was possible

The setup was great... vtec was powerful, i really loved it, with r888 tires it did around 5.7sec 0-60mph so the car was fast for an N/A prelude.... but after 3 years of having a powerful NA setup i just decided i finally got bored with N/A and want to try sth different... and the engine now is much newer, with stunning low mileage at around 30k miles...

i have an onboard vid of how my vtec was running u can take a look if you want :

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Tue Nov 13, 2012 10:24 pm

Nice looking lude and impressive specs (old) and plans (new)

What's happened to the old engine now?

vlad · Post by **vlad** » Wed Nov 14, 2012 8:56 am

wurlycorner wrote:What's happened to the old engine now?

it was sold in parts block/head/manifolds

A1ex · Post by **A1ex** » Wed Nov 14, 2012 9:59 am

vlad wrote:with r888 tires it did around 5.7sec 0-60mph

Where did you get that timed? I'm guessing not somewhere in the UK mind

My setup is similar to yours but with 228bhp & a 5th gen, would love to find out what mine is

bennyboy · Post by **bennyboy** » Wed Nov 14, 2012 10:48 am

A1ex wrote:
vlad wrote:with r888 tires it did around 5.7sec 0-60mph
Where did you get that timed? I'm guessing not somewhere in the UK mind My setup is similar to yours but with 228bhp & a 5th gen, would love to find out what mine is

Ditto. I used to have a GTECH Pro that seemed pretty accurate, but it's long since broken

bennyboy · Post by **bennyboy** » Wed Nov 14, 2012 10:48 am

Oh and nice lude Vlad!

Welcome

vlad · Post by **vlad** » Wed Nov 14, 2012 4:54 pm

yup i used gtech and some android apps that use GPS and etc

mart609 · Post by **mart609** » Wed Nov 28, 2012 9:30 pm

very nice looking lude

vlad · Post by **vlad** » Fri Nov 30, 2012 4:27 pm

So, despite the "beautiful" fall/winter aura spreading out here... some progress needs to be done

Two days ago I received a package with a custom rear big brake kit from a friend, this is a 290mm brake discs from Toyota Avensis, some spacers and adapters for rear calipers, u can also see there brand-new looking set of calipers with new rubber parts and powder coated in black, new pads and re-drilled discs of course

Not even waiting for any sec, I mounted it yesterday on a car and here it how it looks

I am still receiving packages with turbo setup parts, like manifold, injectors, valves and stuff, but I will show u that as soon as i will have it all complete

Post by **4thgenphil** » Fri Nov 30, 2012 4:42 pm

nice, where did you get the adaptors from?

Lude Generation

Vlad's SiR-T TimeAttack Build

Re: Vlad's BB1 - from Poland with Boost :)

Re: Vlad's BB1 - from Poland with Boost :)

Re: Vlad's BB1 - from Poland with Boost :)

Re: Vlad's BB1 - from Poland with Boost :)