No 4ws light. Not the usual issue

Post by **Lude-dude** » Mon Oct 29, 2012 10:45 am

sub is on the steering rack?

not 100 %

[youtube]5ClLwxDUCk8[/youtube]

looks like you have abs code also, try clear/reset that then see what happens

Post by **Merlin** » Mon Oct 29, 2012 10:56 am

If the ABS bulb goes off at ignition that might just be a old stored code. Like suggested give it a reset anyway.

Post by **indigolemon** » Mon Oct 29, 2012 11:15 am

Looks like 16 for the ABS and 20 for 4WS to me. I assume 4WS is the larger top light?

ABS: 16 - Wheel Sensor: RR (Electrical Noise/Intermittent Interruption)

Animal Mother · Post by **Animal Mother** » Mon Oct 29, 2012 4:16 pm

WHat do you think my next plan of action should be?

I was thinking of:

1. Do the 4ws alignment reset procedure and see if that works.
2. Take the steering wheel off and inspect the sensor and see if it's aligned properly (also check the condition of it).
3. Check the sub sensor for damage to the cable etc.

I'm not sure where to go after that. New parts?

Post by **indigolemon** » Mon Oct 29, 2012 4:17 pm

What lights are coming on then? Is it both ABS and 4WS? Do they only come on after you start moving?

Post by **Lude-dude** » Mon Oct 29, 2012 6:05 pm

reset the abs just to clear the code, might upset the 4ws

refer to this thread:

http://preludeuk.forumup.com/about45105-preludeuk.html

he did not seem to fix it, might need a new sensor