Hey all..!!

mercutio · Post by **mercutio** » Sun Sep 30, 2012 10:43 pm

yeah the 2.0 litre will fit have a look at the engine gearbox threads there are a few threads with all the gearboxs listed with all there ratios

Post by **Kawa** » Sun Sep 30, 2012 10:43 pm

BY THE WAY: you can post a progress report in this forum perhaps? http://www.ludegeneration.co.uk/non-lude-profiles/

Keep us up to date!

Danni22 · Post by **Danni22** » Sun Sep 30, 2012 10:46 pm

It's being fitted into a vw polo 6n and being used as road/drag car I'm going to be going down the turbo route once its all up and running ect.. Ill get the build up on here

Bri · Post by **Bri** » Mon Oct 01, 2012 7:29 am

Hello and welcome, Not sure if the 2.0 box will fit, you may be better off just getting a close ratio box. As for the swap to manual, my advice is phone a friend to help because its the biggest muffin in the world on your own on a driveway in the rain

Looking back II wish I had of unpluged the wire harness and pulled the engine out to do this job, would of been so much easier to do it that way but noooooo, I had to make it 10 times harder for myself

Good luck and post up plenty of pics.

Danni22 · Post by **Danni22** » Mon Oct 01, 2012 8:15 am

The engine will be out when I do the swop. What box is close ratio and what car can I get them off??

Bri · Post by **Bri** » Mon Oct 01, 2012 8:31 am

the code on my gear box is M2p4 which is the non lsd box, same ratio box as teggy ATR or there is the M2B4 which is the LSD close ratio box. will have a look there is a guide somewhere explaining the different codes.

Bri · Post by **Bri** » Mon Oct 01, 2012 8:33 am

http://www.ludegeneration.co.uk/honda-p ... t2130.html

M2A4 - JDM 4G
M2B4 - JDM 4G LSD
M2F4 - USDM 4G
M2U4 - JDM 5G Type-S ATTS/USDM Type-SH ATTS
M2Y4 - JDM/USDM 5G Base
M2Z4 - JDM 5G SiR S-Spec/JDM 5G w/ LSD option
M2P4 - UKDM 5G 2.2VTI ('99-' 00) same ratios as the U2Q7 Accord Type R box, just minus the LSD

Post by **Merlin** » Mon Oct 01, 2012 9:08 am

Welcome to LG!!

mart609 · Post by **mart609** » Tue Oct 02, 2012 9:53 am

If you want a close ratio box. look into H2B conversions
B series gearboxes from civics and integras have alot more close ratios.
But they're not a straight fit to H series engines but you can get a a H2B plate that makes them compatible

Post by **Donald** » Tue Oct 02, 2012 10:53 am

Following up from mart's post, maybe have a read here: http://www.ludegeneration.co.uk/non-lud ... t2555.html