Drax's JUN Prelude: Papa Smurf edition

Post by **Merlin** » Wed Aug 29, 2012 2:11 pm

Awesome job on the CF bonnet!! Where did you attach the towing strap to? Was it easy to fit?

Post by **Drax** » Wed Aug 29, 2012 2:34 pm

Merlin wrote:Awesome job on the CF bonnet!! Where did you attach the towing strap to? Was it easy to fit?

here mate

just took a pic for you. i used a spare tow hook usually used for trailer straps etc i had lying around, then just fitted the strap straight to it so its usable as well as looks nice.

Post by **Merlin** » Wed Aug 29, 2012 2:42 pm

Nice. Thanks for the pic. A tow strap is something I really need to get. It never occured to me to fit it to the existing tow point

Post by **Donald** » Wed Aug 29, 2012 6:46 pm

Nice work on the bonnet

That tow point on a 5G is so far back if you used it without an appropriate strap I'm sure you would drokk something up. I actually hit it on a tabletop speedbump the other day, made such an awful noise

mart609 · Post by **mart609** » Thu Aug 30, 2012 10:41 am

Great job on the bonnet!

Gave me an idea that maybe I could remove the scratches out of my carbon roof by doing that?

nitin_s1 · Post by **nitin_s1** » Thu Aug 30, 2012 3:47 pm

Awesome.. Nice work on the CF bonnet.

Post by **NafemanNathan** » Thu Aug 30, 2012 3:56 pm

Amazing result on the bonnet bud

Be careful with the tow hook and various gradients though. Too steep and too much pull and it could either pop your lip off or lift your bumper causing something to give/crack.

Also, pulling around corners could be a bit of an issue with that setup.

Post by **Drax** » Thu Aug 30, 2012 5:02 pm

Gorgon wrote:Nice work on the bonnet

That tow point on a 5G is so far back if you used it without an appropriate strap I'm sure you would drokk something up. I actually hit it on a tabletop speedbump the other day, made such an awful noise

eek! bet that didnt sounds good

mart609 wrote:Great job on the bonnet! Gave me an idea that maybe I could remove the scratches out of my carbon roof by doing that?

carbon sunroof is that? yeh should work the same way

nitin_s1 wrote:Awesome.. Nice work on the CF bonnet.

cheers matey

NafemanNathan wrote:Amazing result on the bonnet bud

Be careful with the tow hook and various gradients though. Too steep and too much pull and it could either pop your lip off or lift your bumper causing something to give/crack.

Also, pulling around corners could be a bit of an issue with that setup.

yeh if it was used it just un-tucks back through the lip so id use it like that instead - its just tucked into the lip so that it doesnt hang or scrape

mercutio · Post by **mercutio** » Thu Aug 30, 2012 6:53 pm

great job on the bonnet will he do my rear spoiler lol

craig_jdm · Post by **craig_jdm** » Thu Aug 30, 2012 7:03 pm

wow very nice cars awesome job on the cf bonnet

Lude Generation

Drax's JUN Prelude: Papa Smurf edition

Re: Drax's Road & Track Lude

Re: Drax's Road & Track Lude