de cat

spudep91 · Post by **spudep91** » Wed Aug 01, 2012 12:29 am

Can i just take the cat off and weld a pipe were it was or is there sensers

Post by **si import** » Wed Aug 01, 2012 2:01 am

They have a sensor going to them but all you need to do is bolt the wire to the chassis so it earthed

spudep91 · Post by **spudep91** » Wed Aug 01, 2012 3:34 am

Ok thanks

mercutio · Post by **mercutio** » Wed Aug 01, 2012 7:27 am

si import wrote:They have a sensor going to them but all you need to do is bolt the wire to the chassis so it earthed

only jdm ludes have a cat temp sensor so you may not need to

spudep91 · Post by **spudep91** » Wed Aug 01, 2012 8:10 am

mine is uk just.

Post by **si import** » Thu Aug 02, 2012 5:46 am

My bad. Didn't realise was just the JDM'S

chrismc · Post by **chrismc** » Thu Aug 02, 2012 7:45 am

spudep91 wrote:mine is uk just.

In which case no welding required, just buy a decat off of eBay- straight swap

spudep91 · Post by **spudep91** » Thu Aug 02, 2012 1:06 pm

I can weld bit of pipe on for nothing de cat cost 50 60 pound its only for the track pal

chrismc · Post by **chrismc** » Thu Aug 02, 2012 5:05 pm

Much cheaper secondhand- & you can still easily unbolt the midpipe from downpipe as/when required

Non-resonated straight pipes also make the exhaust note a bit odd.....

bristol_bb4 · Post by **bristol_bb4** » Thu Aug 02, 2012 6:22 pm

chrismc wrote:Non-resonated straight pipes also make the exhaust note a bit odd.....

mine doesnt sound odd with a non res pipe?