Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

NOOOOOO!!! Oil issues again. Not sorted :(
you do know to run the engine for a few mins after putting in fresh oil because the oil filter is dry?
then stop engine and check level again
both my car takes bang on 5 litres and mobil 1 is a rip off
it is SL grade oil.. local auto shops do SL grade oil for 15 quid.
there is no difference except the price you pay and what the labels advertise,
10w40 is 10w40
check the API mark for the quality dont get skanked by the shops
then stop engine and check level again
both my car takes bang on 5 litres and mobil 1 is a rip off
it is SL grade oil.. local auto shops do SL grade oil for 15 quid.
there is no difference except the price you pay and what the labels advertise,
10w40 is 10w40
check the API mark for the quality dont get skanked by the shops
- bristol_bb4
- LotM Winner
- Posts: 3369
- Joined: Mon Oct 10, 2011 2:19 pm
- My Generation: 4G
Phil, The pressure gauge in the car which i got paw to install.
Ziyaan, would you put asda oil in your motor if youd spent 4k on it? The mobil1 was 40 quid for 5L whichisnt that bad in my eyes
Didnt know about the filter thing but havent changed it so still has oil in, i just took the oil out to see how much was in there using a sump pump.
Ziyaan, would you put asda oil in your motor if youd spent 4k on it? The mobil1 was 40 quid for 5L whichisnt that bad in my eyes
Didnt know about the filter thing but havent changed it so still has oil in, i just took the oil out to see how much was in there using a sump pump.
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K

- bristol_bb4
- LotM Winner
- Posts: 3369
- Joined: Mon Oct 10, 2011 2:19 pm
- My Generation: 4G
I know! Twas a fair size build, a decnet chunk of that was on parts.
The gauge is pluged in where the pressure sensor that controlled the oil light was. Im pretty sure its working properly as the readings are fine before i push the engine hard which is what makes me think the oil could be loosing its edge as a couple weeks ago i didnt have this problem.
The gauge is pluged in where the pressure sensor that controlled the oil light was. Im pretty sure its working properly as the readings are fine before i push the engine hard which is what makes me think the oil could be loosing its edge as a couple weeks ago i didnt have this problem.
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K

- 4thgenphil
- Supporter 2016
- Posts: 6661
- Joined: Tue Aug 03, 2010 4:15 pm
- My Generation: 4G
- Location: filming two girls one cup 2
- Has thanked: 5 times
- Been thanked: 29 times