**WANTED** ABS pump/unit (4th gen)

bennyboy · Post by **bennyboy** » Thu Sep 19, 2019 11:12 am

Have any luck @Hagland-BB4 ?

arif_manji · Post by **arif_manji** » Thu Sep 19, 2019 1:38 pm

bennyboy wrote: ↑
Tue Apr 09, 2019 1:08 pm
As title, mine is playing up and I need a known working one to drop in.
Might have something I can swap/deal with too as I have a few lude bits, so let me know if you have one and also if there's something you're after.

Ta,

Ben

Hi Ben,

I do have one and it was working before removal. Its been sat in my garage for 10 months wrapped up. I can't give you any guarantee on it mate.

Cheers

bennyboy · Post by **bennyboy** » Fri Sep 20, 2019 11:50 am

Thanks @arif_manji , I'll fire you a PM later today

Space1999 · Post by **Space1999** » Sun Oct 06, 2019 11:22 am

I had this exact same problem, on my Mk IV.

Asked around, looked, searched for ages - but nothing.

Ended up having to get mine rebuilt.

An engineer friend fixed mine – it was the motor inside which had seized due to water ingress.

This company can service them – this is likely your best bet...

http://www.bba-reman.com/gb/index.aspx

Good luck.

DanishLuder · Post by **DanishLuder** » Sun Oct 06, 2019 1:32 pm

I have the abs MOdule / block or whatever it is called, but not the actual pump. Is that what you are looking for?
(The one in the left side of the enginebay, besides the fuse box)

arif_manji · Post by **arif_manji** » Mon Oct 07, 2019 8:51 am

Space1999 wrote: ↑
Sun Oct 06, 2019 11:22 am
I had this exact same problem, on my Mk IV.

Asked around, looked, searched for ages - but nothing.

Ended up having to get mine rebuilt.

An engineer friend fixed mine – it was the motor inside which had seized due to water ingress.

This company can service them – this is likely your best bet...

http://www.bba-reman.com/gb/index.aspx

Good luck.

How much did he charge to rebuild it?

Cheers

bennyboy · Post by **bennyboy** » Tue Oct 08, 2019 10:15 am

Thanks guys.
@Space1999 yeah I looked into it a while back and they seem to suffer after being sat for a while, which mine was due to a battery/central locking issue. I've got the guide for stripping and cleaning somewhere, my plan is to get another so that I can do just that then swap over in one go, then do the same to the original.
@arif_manji - Sorry, haven't forgotten you, just a manic weekend. Will message shortly.

bennyboy · Post by **bennyboy** » Tue Oct 08, 2019 10:16 am

@DanishLuder - Thanks, but yeah it is indeed the unit itself I need, I already have a spare ABS ECU in my box of tricks.

Space1999 · Post by **Space1999** » Tue Oct 08, 2019 8:34 pm

BBA Reman is the company to go for to get them rebuilt.

DanishLuder · Post by **DanishLuder** » Sun Oct 13, 2019 12:00 pm

bennyboy wrote: ↑
Tue Oct 08, 2019 10:16 am
@DanishLuder - Thanks, but yeah it is indeed the unit itself I need, I already have a spare ABS ECU in my box of tricks.

Its not the ECU that I have, its the unit I guess.
I'm not sure what the actual name is, but can you confirm if its like this one?

Lude Generation

WANTED ABS pump/unit (4th gen)

WANTED ABS pump/unit (4th gen)

WANTED ABS pump/unit (4th gen)

WANTED ABS pump/unit (4th gen)

WANTED ABS pump/unit (4th gen)

WANTED ABS pump/unit (4th gen)

WANTED ABS pump/unit (4th gen)

WANTED ABS pump/unit (4th gen)

WANTED ABS pump/unit (4th gen)

WANTED ABS pump/unit (4th gen)

WANTED ABS pump/unit (4th gen)