integra/civic front shock forks on a 4th gen?

rrobis · Post by **rrobis** » Tue May 02, 2017 1:05 pm

hi,
so i've read that chaps used to put teggy front shock forks on prelude to get front slightly lower.
does this applies to Integra only or any civic EG/EK front fork will do?

in theory integra is based on civic and shares lots of components..

Post by **4thgenphil** » Tue May 02, 2017 5:48 pm

Honestly not worth the effort mate

rrobis · Post by **rrobis** » Tue May 02, 2017 5:52 pm

4thgenphil wrote:Honestly not worth the effort mate

Been there done that?
Really it sounds like more pita than the result, just wanted to know if my assumptions were true

Sent from my SM-G925F using Tapatalk

Post by **4thgenphil** » Tue May 02, 2017 7:45 pm

Its a couple of mm max really. Not a massive pita but a bit of work.

rrobis · Post by **rrobis** » Wed May 03, 2017 11:53 am

4thgenphil wrote:Its a couple of mm max really. Not a massive pita but a bit of work.

Ok, thanks for clarification!

Sent from my SM-G925F using Tapatalk

Post by **Kemp** » Thu May 04, 2017 6:20 pm

why not worth ?
you´ll get about 5-7 mm drop for around 10 bucks on the front
Takes about 5 min to modify them, you only have to sand off the fork about 2 mm to make them fit on on the prelude lca

i did it and im happy with it

Post by **4thgenphil** » Fri May 05, 2017 3:14 pm

Its not that much of a drop if you have them stood next to each other. Its from the centre of the shock locking bolt hole to the lca bolt hole, not the top of the shock fork

mercutio · Post by **mercutio** » Sat May 06, 2017 2:15 pm

but that will still lower the whole shock??

Lude Generation

integra/civic front shock forks on a 4th gen?

integra/civic front shock forks on a 4th gen?

Re: integra/civic front shock forks on a 4th gen?

Re: integra/civic front shock forks on a 4th gen?