All the parts for an auto to manual conversion

Phil87 · Post by **Phil87** » Wed Mar 15, 2017 6:43 pm

As 4th gen phil beat me to Jonnyb's pirate lude it's time to look at getting my current car sorted out. I have a 5th gen ukdm 2.2 auto and want to start process of getting it converted to a manual. I've seen a few posts on here before where some guys had nearly all of the things required for the conversion. Not a requirement but if anyone has a good set of the parts required please let me know.

Post by **Merlin** » Thu Mar 16, 2017 9:36 am

IMO you would be best to buy a breaker car and harvest all the useful pieces from that for the conversion. Then sell the rest of the bits from the breaker to pay for the conversion.

Ted · Post by **Ted** » Fri Mar 17, 2017 4:34 pm

I should have it all, twice. Including m2b4 box

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Mar 19, 2017 12:15 am

I have a full set up too, except for the gear gator for a 5g.
But Ted's got in first.

Andyjess666 · Post by **Andyjess666** » Sun Mar 19, 2017 6:07 pm

How hard is this to do change from auto to Manuel

Post by **Vtecmec** » Sun Mar 19, 2017 6:19 pm

If you can do a clutch, you can do it.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Mar 19, 2017 7:15 pm

That ^^^^
It's a very easy conversion on a 4g.
No complex technical mods or anything.

Post by **Vtecmec** » Sun Mar 19, 2017 7:32 pm

Oops, except for the gearbox bracket that will need welding on.

http://www.ludegeneration.co.uk/post214247.html#p214247

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Mar 19, 2017 7:59 pm

Doesn't that depend on the age of the lude?
Early ones like yours were different auto-manual, but thought later 4g's were the same???

Andyjess666 · Post by **Andyjess666** » Sun Mar 19, 2017 8:05 pm

How hard is it to do a 5th gen then an how much would the parts cost ?