wheels

fleetpete5 · Post by **fleetpete5** » Thu Jun 16, 2016 3:28 pm

Hiya...I'm a new owner of an 'X' reg. 2ltr Prelude Sport. Just had the alloys refurbished to a very high standard by Raw Wheels in York...only problem is the plastic studs covers are in a proper mess. They can't be dipped like the wheels & need to be stripped & re-painted. Question is, does anybody have a set in good condition to sell or, is aware of a supplier - or are they available as a new part? The wheels are 4 stud 16"...

Post by **vanzep** » Thu Jun 16, 2016 9:30 pm

not sure but i think you might be on about the same wheels as these

either that or you could post up a photo of the wheels you have

fleetpete5 · Post by **fleetpete5** » Fri Jun 17, 2016 7:57 am

Hi Vanzep, yes they are the same wheels. Tried all over to get a set...no luck tho'. Do you have any ideas?

Post by **vanzep** » Fri Jun 17, 2016 10:50 am

Ive seen a few sets of centre caps come up on ebay.
I can only find one centre cap for sale on ebay at present:
http://www.ebay.co.uk/itm/CENTRE-CAP-HO ... SwboVXPEL4
Not a very good one and expensive.

I think most people just sand back the caps and repaint them with a rattle can

You could put up a wanted ad as follows:

Motegi Alloy Wheel Centre Caps

The wheels you have are 16" Motegi 4studx114 and were only available on 2L 5th gens - 17" Motegi 5studx114 were available to 2.2L vtec - fairly sure the centre caps from the 17" wheels will also fit the 16" wheels.

Hope this helps.

Post by **vanzep** » Fri Jun 17, 2016 11:01 am

or there is a guy on the forum here selling a set of 17" Motegi Alloys with Centre Caps

http://www.ebay.co.uk/itm/Honda-Prelude ... SwmtJXXItd

Post by **4thgenphil** » Fri Jun 17, 2016 11:55 am

I have 2 spare

GJMHONDA2012 · Post by **GJMHONDA2012** » Fri Jun 17, 2016 12:11 pm

4thgenphil wrote:I have 2 spare

sorry for spooling this post but 4thgenphil I still need an address to send ur copper brake pipe buddy, I've mailed you etc and no response, u have paid for it but I need a postal address, pls pm me with one, cheers

Post by **4thgenphil** » Fri Jun 17, 2016 1:11 pm

Thought i pmd u

fleetpete5 · Post by **fleetpete5** » Fri Jun 17, 2016 1:22 pm

Hiya...thanks for your reply, and interest. I think I'll get them sanded back & re-paint them. Difficulty's gonna be getting a good match I guess. Onwards & upwards!!!

GJMHONDA2012 · Post by **GJMHONDA2012** » Fri Jun 17, 2016 2:03 pm

4thgenphil wrote:Thought i pmd u

no mate haven't had anything pm me ur address and I'll get the brake pipe posted out for ya, cheers