Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

BB6 - Thusee from Toronto!
-
- Posts: 691
- Joined: Mon Mar 03, 2014 12:03 am
- My Generation: 5G
- XBOX GamerTag: DA2NV
- PSN GamerTag: IDRVSLW
Re: BB6 - Thusee from Toronto!
Haha yes they will happen! @bb1boy
In the mean time i swapped in the Euro R rim's fronts have 5mm spacers to clear the caliper bracket and rears have 10mm spacers.
Thoughts on wheels? Keep the white or keep the euro r?




In the mean time i swapped in the Euro R rim's fronts have 5mm spacers to clear the caliper bracket and rears have 10mm spacers.
Thoughts on wheels? Keep the white or keep the euro r?





- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21506
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2501 times
- Been thanked: 312 times
-
- Posts: 691
- Joined: Mon Mar 03, 2014 12:03 am
- My Generation: 5G
- XBOX GamerTag: DA2NV
- PSN GamerTag: IDRVSLW
Re: BB6 - Thusee from Toronto!
They do look smaller than the RSX rims haha because the rsx is concaved unlike the euro r, where they bend in at the lip
Tire size i went from stock 205 / 50 /R16 (white rims) to 205 / 45 / R16 (Euro r)
Went down on side wall because i kept rubbing on full turns. I'll take better pictures today going to go out for a drive in a few minutes.
Tire size i went from stock 205 / 50 /R16 (white rims) to 205 / 45 / R16 (Euro r)
Went down on side wall because i kept rubbing on full turns. I'll take better pictures today going to go out for a drive in a few minutes.
-
- Posts: 691
- Joined: Mon Mar 03, 2014 12:03 am
- My Generation: 5G
- XBOX GamerTag: DA2NV
- PSN GamerTag: IDRVSLW
Re: BB6 - Thusee from Toronto!
Thanks! haha yah, just so you know for the fronts you MUST run a MINIMUM 5 MM Spacer otherwise the wheels won't clear the Caliper Bracket.tom023 wrote:Wow those euroR rims look smashing. I need a set for mine!
Sent from my Redmi Note 2 using Tapatalk
I did a test and after bolting it down i could not spin it free hand it was stuck on the bracket. (Did not bolt it in all the way just snug)