Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

the wifes EK civic - d16y8 turbo
Got a car that isn't a Lude? There's no condemnation here. Tell us about it!
Rudelude
- lucas
- Posts: 1061
- Joined: Sat Jan 28, 2012 3:27 pm
- My Generation: 4G
- XBOX GamerTag: I Lucas L
- Location: Glasgow
- Has thanked: 1 time
- Been thanked: 5 times
- Contact:
Re: the wifes EK civic - d16y8 turbo
Post by lucas » Mon Apr 04, 2016 4:46 pm
Perseverance ... Or just too poor to get it finished quickly haha.
Yeah its already quite unique due to the design I've went for, not only thinking about a neat set up but making sure the flow is going to be smooth and short from the turbo
Hopefully the new colour will set the car off and give it a completely new look
Yeah its already quite unique due to the design I've went for, not only thinking about a neat set up but making sure the flow is going to be smooth and short from the turbo

Hopefully the new colour will set the car off and give it a completely new look


lucas
- lucas
- Posts: 1061
- Joined: Sat Jan 28, 2012 3:27 pm
- My Generation: 4G
- XBOX GamerTag: I Lucas L
- Location: Glasgow
- Has thanked: 1 time
- Been thanked: 5 times
- Contact:
Re: the wifes EK civic - d16y8 turbo
Post by lucas » Fri Apr 08, 2016 1:31 pm

Got some more fittings and a 3" gasket for th v-band

Took a while to figure out the thread sizes etc for everything but hopefully i got it all right.
Going out just now to for everything

Sent from my HTC One using Tapatalk

lucas
- lucas
- Posts: 1061
- Joined: Sat Jan 28, 2012 3:27 pm
- My Generation: 4G
- XBOX GamerTag: I Lucas L
- Location: Glasgow
- Has thanked: 1 time
- Been thanked: 5 times
- Contact:
Re: the wifes EK civic - d16y8 turbo
Post by lucas » Fri Apr 08, 2016 6:17 pm
God damn !
Wrong threads, and i wouldnt have fit on thanks to the compressor housing.. And im not taking it off just to fit it lol

Honestly, ive spent more money than what the turbo cost just to get all the fittings.. And now ive just had to order an m14 to an6 straight and an an-6 to an-6 adapter to bring it out past the housing and to give it more clearance as its going to be too tight if it was to screw right in
But it does look like the water lines I got fit perfectly, good job i bought the longer banjo eye for the bottom of the rad
Also made an attempt of temporally holding the ic in place by hanging it on rope untill i can get someone out to weld brackets up, which helped me get the pipes on etc.. Sitting squity just now but nothing i can do untill i get it mounted solid

Started to rain so had to call it day at this point, once the other bits come i can hopfully get it fired up !
Sent from my HTC One using Tapatalk
Wrong threads, and i wouldnt have fit on thanks to the compressor housing.. And im not taking it off just to fit it lol

Honestly, ive spent more money than what the turbo cost just to get all the fittings.. And now ive just had to order an m14 to an6 straight and an an-6 to an-6 adapter to bring it out past the housing and to give it more clearance as its going to be too tight if it was to screw right in

But it does look like the water lines I got fit perfectly, good job i bought the longer banjo eye for the bottom of the rad


Also made an attempt of temporally holding the ic in place by hanging it on rope untill i can get someone out to weld brackets up, which helped me get the pipes on etc.. Sitting squity just now but nothing i can do untill i get it mounted solid


Started to rain so had to call it day at this point, once the other bits come i can hopfully get it fired up !
Sent from my HTC One using Tapatalk

lucas
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21511
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2507 times
- Been thanked: 317 times
Post by wurlycorner » Fri Apr 08, 2016 8:38 pm
Figuring out fiddly bits like that is a total pita. Trying to suss out the drain arrangement for my wash tank is being incredibly difficult!
--
Iain.
Iain.
Super Secret 1G (not really super secret!)
wurlycorner
- lucas
- Posts: 1061
- Joined: Sat Jan 28, 2012 3:27 pm
- My Generation: 4G
- XBOX GamerTag: I Lucas L
- Location: Glasgow
- Has thanked: 1 time
- Been thanked: 5 times
- Contact:
Re: the wifes EK civic - d16y8 turbo
Post by lucas » Fri Apr 08, 2016 11:30 pm
Yep ! Total pita indeed lol.
Its anoying tring to figure out the thread pitches etc, ive had to do some backward research and then a lucky guess on the radiator banjo.
Hopfully the bits i bought for the water return on the turbo will extend enough to get a tight fit without being to close to anything
What trouble are you having with yours ?
Sent from my HTC One using Tapatalk
Its anoying tring to figure out the thread pitches etc, ive had to do some backward research and then a lucky guess on the radiator banjo.
Hopfully the bits i bought for the water return on the turbo will extend enough to get a tight fit without being to close to anything

What trouble are you having with yours ?
Sent from my HTC One using Tapatalk

lucas
Jump to
- Lude Generation
- ↳ Site Features / Announcements
- ↳ Suggestion / Site Problems
- ↳ Archive
- ↳ Registration Issues
- Members
- ↳ New Members
- ↳ Lude of the Month
- ↳ Archive
- ↳ Lude Profiles
- ↳ Gone but not forgotten
- ↳ Non-Lude Profiles
- ↳ Spotted
- General
- ↳ General Chat
- ↳ Look What I Found!
- ↳ Events
- ↳ Event Pics
- ↳ Calendar
- ↳ Scotland
- ↳ Wales
- ↳ England (North)
- ↳ England (Southeast)
- ↳ England (Southwest)
- ↳ External Links
- Technical
- ↳ Guides / How to's / Tech Section
- ↳ Knowledge Base
- ↳ Engine / GearBox
- ↳ Wiki-Lude
- ↳ Tuning
- ↳ Chassis / Brakes / Steering / Wheels
- ↳ Wiki-Lude
- ↳ Body Work / Detailing
- ↳ Wiki-Lude
- ↳ Electrical / Lights / ICE
- ↳ Wiki-Lude
- ↳ Interior
- ↳ Wiki-Lude
- Traders, Buying and Selling
- ↳ Cars for sale
- ↳ Parts for sale
- ↳ Sales Archive
- ↳ Cars Breaking
- ↳ Group Buys
- ↳ Wanted
- ↳ eBay
- ↳ Special Offers & Recommendations
- ↳ RockAuto
- ↳ Performance Autoworks
- ↳ Opie Oils
- ↳ Nimbus Motorsport
- ↳ 4speed
- ↳ T7Design
- ↳ Competition Clutch
- ↳ TDC Automotive
- ↳ H-Tune
- ↳ Phoenix Close
- ↳ Members' Businesses
- ↳ Insurers
- ↳ Chris Knott Insurance
- ↳ Adrian Flux Insurance
- ↳ Prestige Keep Moving Car Insurance Scheme
- ↳ Sky Insurance
- ↳ Greenlight Insurance
- ↳ Honda Tuner Magazine
- Other Hondas
- ↳ S2000
- ↳ Accord
- ↳ Integra
- ↳ Civic