ATR Inlet Manifold/Fuel Line Pics wanted (4G)

Dino · Post by **Dino** » Thu Jan 28, 2016 3:25 pm

Gentlemen.

Ive got an ATR Inlet manifold to fit to fit on my 4th gen.

It is fitted With an ATR Fuel rail.

I will need to get a fuel line made up with banjo bolts.

So what I'm asking for is, if anyone can post up a few pics of their ATR inlet manifold with ATR Fuel Rail fitted on a 4th Gen (Not 5th)

Its so I can see how the routing is likely to go.

Cheers,

Marc

Post by **Merlin** » Thu Jan 28, 2016 3:57 pm

Sorry I have not got around to getting you some pics, although I have been at the garage I haven been near my car

What is the issue you are facing? That the 4G fuel line does not reach the ATR fuel rail?

I am using an aftermarket Lude fuel rail with an adapter plate that attaches it to the IM (well you should know/remember that

). I had no issue using the stock fuel line and attaching it to my fuel rail/FPR.

Post by **Drax** » Thu Jan 28, 2016 4:04 pm

i need to order a correct size fuel rail adapter for mine as i have an Evo fuel rail on my ATR inlet, sorry i can't help here Dino

Post by **vanzep** » Thu Jan 28, 2016 4:13 pm

Ive got an ATR manifold thats been modified to fit a 4g
Its not on the car so dont know if thats of any use to you but would be easy to get some pics

Bought it from BristolBB4 (Ste) not sure but possibly paw did the work on it

bb1-h22a7-jay · Post by **bb1-h22a7-jay** » Fri Jan 29, 2016 11:49 pm

I got a adapter plate from rosko racing, but found out that i dont need it when i move to the hadata s300 ecu, but look up rosko racing very helpfull guys

bb1-h22a7-jay · Post by **bb1-h22a7-jay** » Fri Jan 29, 2016 11:53 pm

I got this from them and they stock alot of other parts

Post by **Merlin** » Mon Feb 01, 2016 9:05 am

Already sent this to Dino but posting here in case anyone else wants the same info:

Dino · Post by **Dino** » Mon Feb 01, 2016 10:52 am

Cheers Al.
How do you remove the fuel line completely from the fixed hard pipe on fire wall?

Post by **Merlin** » Mon Feb 01, 2016 11:06 am

There are 3 fuel lines that come from the tank all the way into the engine bay. The main fuel line, the fuel return line and the EVAP line. I assume you are removing the EVAP system? If you do remove the EVAP you can either cut the line in the engine bay or at the fuel tank, the EVAP line needs to vent so don't crimp/seal it.

The fuel return line, which goes to the fuel pressure regulator, terminates on the fire wall and transfers to a soft line that has plenty slack in it.

The main fuel line terminates at the fuel filter, then a hard/soft line takes it to the fuel rail. I have not looked into it as all my lines were long enough but I would imagine that you could take a new soft line from the fuel filter, routing it how you want, to the fuel rail. I am pretty sure the line from the fuel filter to the fuel rail has banjo fittings on both ends.

Post by **Thebusofwoe** » Mon Feb 01, 2016 7:44 pm

Will follow this as im also planning a atr inlet manifold on to my A2.

Lude Generation

ATR Inlet Manifold/Fuel Line Pics wanted (4G)

ATR Inlet Manifold/Fuel Line Pics wanted (4G)

Re: ATR Inlet Manifold/Fuel Line Pics wanted (4G)

Re: ATR Inlet Manifold/Fuel Line Pics wanted (4G)