Camber Kits

Post by **RattyMcClelland** » Tue Nov 03, 2015 8:37 pm

I run alot of camber on the front naturally being low.
I wore my AD08s all perfectly evenly all around.
2 degrees of toe on the rear total toe or 2degrees each wheel?

On my van when i lowered it. Before alignment i was at a total or 12degrees rear toe and 2.8 degrees rear camber and i went through a set of tyres in 2000 miles.
After aligment and the recommended to the 2 degrees of total toe and around 2.8degrees of rear camber (non adjustable until i get adjustable bushes) i wear the inside edges now at around 16000 miles.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Tue Nov 03, 2015 9:26 pm

Just admit it mec, you're turning to the dark side...

Post by **Vtecmec** » Tue Nov 03, 2015 9:52 pm

Guys I only want to be able to adjust my camber settings.

bennyboy · Post by **bennyboy** » Tue Nov 03, 2015 10:18 pm

Isn't yours a BB1 vtecmec? So you have a bit of camber adjustment on the rears where the 2WS doesn't?
I'm afraid I have no experience of camber kits as I've never needed one. Mine is lowered about 40mm and has been for around ten years. I do get a little extra wear on the insides as you'd expect but that's with a PAW fast road geo setup.
Sorry if that's not really a help

Post by **Merlin** » Wed Nov 04, 2015 10:28 am

Vtecmec wrote:Guys I only want to be able to adjust my camber settings.

I still think it will be toe rather than camber. I don't excessively wear tyres on either of my Ludes and my 4G is pretty low!

Anyway from what I have read on the internet Ingalls stuff seems to be the most recommended: https://www.ingallseng.com/mmy.php?year ... &model=759

Post by **Vtecmec** » Fri Nov 13, 2015 11:18 am

Just as a follow up, I've sent the car to the local garage this morning to have the alignment checked, and it's perfectly aligned and within the specs.............

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Fri Nov 13, 2015 12:26 pm

WTF?

Ludebob95 · Post by **Ludebob95** » Fri Nov 13, 2015 5:36 pm

It's all the hard driving you must do @Vtecmec

Post by **Vtecmec** » Fri Nov 13, 2015 6:11 pm

Everything about me is hard.

mercutio · Post by **mercutio** » Fri Nov 13, 2015 6:42 pm

Vtecmec wrote:Everything about me is hard.

oooooooooooooooooooooohhhhhhh get yooooooooooooooooooouuuuuuuu