will 15 inch wheels fit over 300mm discs

Post by **4thgenphil** » Tue Nov 03, 2015 11:34 am

Merlin wrote:How was it on the forum that just recently redrilled the ATR discs to 4x114?

i did but not atr discs

Dino · Post by **Dino** » Tue Nov 03, 2015 3:19 pm

EP3 Discs

EDIT :.. Just read Nitins Post

They are what I had on my last Lude with ATR set-up

Post by **newkid** » Tue Nov 03, 2015 9:43 pm

Atr setup should be running 28mm thick discs. Ep3s are only 25mm.

Dino · Post by **Dino** » Wed Nov 04, 2015 12:19 pm

Yes but hub centre size is different on ATR and doesnt fit lude.

Yes the EP3 discs are thinner and you will get slightly more pedal travel, but they will fit the prelude hub nice and tight.

Post by **Merlin** » Wed Nov 04, 2015 12:32 pm

Are the ATR dics too tight or loose on 4G Preludes? ATR discs fit the 5G fine.

Dino · Post by **Dino** » Wed Nov 04, 2015 2:16 pm

I cant remember Al....LOL

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Wed Nov 04, 2015 3:30 pm

Dino wrote:you will get slightly more pedal travel

Until the first time they take up, then it will be the same?

ps this bloody debate was why I gave up an attempted 300mm 4x114.3mm re-drilled direct from the factory, group buy!!!

Post by **newkid** » Wed Nov 04, 2015 7:00 pm

So what exactly is the atr bore size. Some sites say the front is 70mm and the rear is 64.1. Thats impossible tho as you wouldnt be able to swap wheels back to front so surely there 64.1 and places like mtec have got the fronts wrong by stating there 70.

Post by **newkid** » Wed Nov 04, 2015 7:06 pm

O and you can fit 300mm under a select few 15's