Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Camber Kits
Chassis/Brakes/Steering/Wheels discussion
- RattyMcClelland
- Moderator
- Posts: 9208
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 203 times
Post by RattyMcClelland » Tue Nov 03, 2015 8:37 pm
I run alot of camber on the front naturally being low.
I wore my AD08s all perfectly evenly all around.
2 degrees of toe on the rear total toe or 2degrees each wheel?
On my van when i lowered it. Before alignment i was at a total or 12degrees rear toe and 2.8 degrees rear camber and i went through a set of tyres in 2000 miles.
After aligment and the recommended to the 2 degrees of total toe and around 2.8degrees of rear camber (non adjustable until i get adjustable bushes) i wear the inside edges now at around 16000 miles.
I wore my AD08s all perfectly evenly all around.
2 degrees of toe on the rear total toe or 2degrees each wheel?
On my van when i lowered it. Before alignment i was at a total or 12degrees rear toe and 2.8 degrees rear camber and i went through a set of tyres in 2000 miles.
After aligment and the recommended to the 2 degrees of total toe and around 2.8degrees of rear camber (non adjustable until i get adjustable bushes) i wear the inside edges now at around 16000 miles.

RattyMcClelland
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21511
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2507 times
- Been thanked: 317 times
Post by wurlycorner » Tue Nov 03, 2015 9:26 pm

Just admit it mec, you're turning to the dark side...

--
Iain.
Iain.
Super Secret 1G (not really super secret!)
wurlycorner
Vtecmec
- bennyboy
- Art Mechanic
- Posts: 2825
- Joined: Sat Aug 20, 2011 11:59 am
- My Generation: 4G
- PSN GamerTag: OCbennyboy
- Location: St Albans, Herts.
- Has thanked: 7 times
- Been thanked: 21 times
- Contact:
Post by bennyboy » Tue Nov 03, 2015 10:18 pm
Isn't yours a BB1 vtecmec? So you have a bit of camber adjustment on the rears where the 2WS doesn't?
I'm afraid I have no experience of camber kits as I've never needed one. Mine is lowered about 40mm and has been for around ten years. I do get a little extra wear on the insides as you'd expect but that's with a PAW fast road geo setup.
Sorry if that's not really a help
I'm afraid I have no experience of camber kits as I've never needed one. Mine is lowered about 40mm and has been for around ten years. I do get a little extra wear on the insides as you'd expect but that's with a PAW fast road geo setup.
Sorry if that's not really a help

bennyboy
- Merlin
- Moderator
- Posts: 12397
- Joined: Fri Aug 06, 2010 9:04 am
- My Generation: 5G
- PSN GamerTag: Merlinbadman
- Location: Edinburgh
- Has thanked: 71 times
- Been thanked: 306 times
Post by Merlin » Wed Nov 04, 2015 10:28 am
I still think it will be toe rather than camber. I don't excessively wear tyres on either of my Ludes and my 4G is pretty low!Vtecmec wrote:Guys I only want to be able to adjust my camber settings.
Anyway from what I have read on the internet Ingalls stuff seems to be the most recommended: https://www.ingallseng.com/mmy.php?year ... &model=759
Merlin
Vtecmec
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21511
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2507 times
- Been thanked: 317 times
Post by wurlycorner » Fri Nov 13, 2015 12:26 pm

WTF?
--
Iain.
Iain.
Super Secret 1G (not really super secret!)
wurlycorner
Ludebob95
Vtecmec
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
Post by mercutio » Fri Nov 13, 2015 6:42 pm
Vtecmec wrote:Everything about me is hard.
oooooooooooooooooooooohhhhhhh get yooooooooooooooooooouuuuuuuu

bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens![]()
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html
mercutio
Return to “Chassis / Brakes / Steering / Wheels”
Jump to
- Lude Generation
- ↳ Site Features / Announcements
- ↳ Suggestion / Site Problems
- ↳ Archive
- ↳ Registration Issues
- Members
- ↳ New Members
- ↳ Lude of the Month
- ↳ Archive
- ↳ Lude Profiles
- ↳ Gone but not forgotten
- ↳ Non-Lude Profiles
- ↳ Spotted
- General
- ↳ General Chat
- ↳ Look What I Found!
- ↳ Events
- ↳ Event Pics
- ↳ Calendar
- ↳ Scotland
- ↳ Wales
- ↳ England (North)
- ↳ England (Southeast)
- ↳ England (Southwest)
- ↳ External Links
- Technical
- ↳ Guides / How to's / Tech Section
- ↳ Knowledge Base
- ↳ Engine / GearBox
- ↳ Wiki-Lude
- ↳ Tuning
- ↳ Chassis / Brakes / Steering / Wheels
- ↳ Wiki-Lude
- ↳ Body Work / Detailing
- ↳ Wiki-Lude
- ↳ Electrical / Lights / ICE
- ↳ Wiki-Lude
- ↳ Interior
- ↳ Wiki-Lude
- Traders, Buying and Selling
- ↳ Cars for sale
- ↳ Parts for sale
- ↳ Sales Archive
- ↳ Cars Breaking
- ↳ Group Buys
- ↳ Wanted
- ↳ eBay
- ↳ Special Offers & Recommendations
- ↳ RockAuto
- ↳ Performance Autoworks
- ↳ Opie Oils
- ↳ Nimbus Motorsport
- ↳ 4speed
- ↳ T7Design
- ↳ Competition Clutch
- ↳ TDC Automotive
- ↳ H-Tune
- ↳ Phoenix Close
- ↳ Members' Businesses
- ↳ Insurers
- ↳ Chris Knott Insurance
- ↳ Adrian Flux Insurance
- ↳ Prestige Keep Moving Car Insurance Scheme
- ↳ Sky Insurance
- ↳ Greenlight Insurance
- ↳ Honda Tuner Magazine
- Other Hondas
- ↳ S2000
- ↳ Accord
- ↳ Integra
- ↳ Civic