clutch damper bypass pipe where u buy them from

kane88 · Post by **kane88** » Sat Oct 17, 2015 5:25 pm

Hi all after a braided clutch line for my 2000 prelude get rid of the clutch damper but were u buy them from i can find for civics and stuff but not prelude
Thanks in advance

gb-lude · Post by **gb-lude** » Sat Oct 17, 2015 7:07 pm

Made a SS braided hose with AN fitting directly from the master to slave cylinder. All parts available on eBay .seller Torques .
Just get the corrects fittings for the master and slave cylinder. Imused AN 3 line .

See page 6 of my build below.

Post by **Merlin** » Mon Oct 19, 2015 11:57 am

If you cannot find an off the shelf one you can get one made. The MC takes an M12 x 1.0 fitting while the slave is M10 x 1.0.

Post by **Drax** » Mon Oct 19, 2015 12:40 pm

add this to the wiki maybe?

Post by **lewd lude lover** » Mon Oct 19, 2015 12:47 pm

i-tuned made a load for the lude a few years ago. ask him maybe?

Post by **NafemanNathan** » Mon Oct 19, 2015 1:30 pm

http://www.ebay.co.uk/itm/271666250898? ... EBIDX%3AIT

Post by **Merlin** » Mon Oct 19, 2015 1:33 pm

Will that line a be a little longer due to the Americans driving on the wrong side of the road? The length won't matter though.

Post by **NafemanNathan** » Mon Oct 19, 2015 1:36 pm

At 60" I'd say so. I didn't measure mine the other day (It certainly wasn't that long), but it'd be worth asking the seller if they can have them made shorter.

gb-lude · Post by **gb-lude** » Mon Oct 19, 2015 4:36 pm

That will work. its a nice mod to give you more feel and tidy up the bay.

Merlin.... they drive on the right side of the road... you sit on the right side of your car... we all do something wrong/left