There is some Protex on front and back,never heard of them before and fine for normal use but response is very slack under a bit of pressure.
I have upgraded to slotted rotors a while back and just want to match off the upgrade and get a better product down there,i will also get to the braided fluid lines next.
Not looking to spend too much just the next step up from road/street use.
Had Project Mu in mind but a bit pricey down here.
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Front Pads Needed,Whats Good?
- Merlin
- Moderator
- Posts: 12394
- Joined: Fri Aug 06, 2010 9:04 am
- My Generation: 5G
- PSN GamerTag: Merlinbadman
- Location: Edinburgh
- Has thanked: 70 times
- Been thanked: 304 times
If you have slotted discs you will want a harder compound pad or the slotted disc will just cheese grater cheap/soft pads to bits if they get too hot.
IMO the best bang for buck pads are Ferodo DS2500 or Hawk HP+. Both are around £125 for the front set. Just stick with cheap guff on the rear. I have £14 Mintex rear pads on the back of my 4th gen!
IMO the best bang for buck pads are Ferodo DS2500 or Hawk HP+. Both are around £125 for the front set. Just stick with cheap guff on the rear. I have £14 Mintex rear pads on the back of my 4th gen!
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
ferodo produce mega amounts of dust
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens![]()
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html
- Greg-SiR
- Supporter 2016
- Posts: 423
- Joined: Thu Aug 21, 2014 1:01 pm
- My Generation: 4G
- Location: Goldcoast,Qld,Australia
- Has thanked: 3 times
Just another thing on the Ferodo i have a query come back requesting the dimensions if someone has it fresh in their that would be great.
Pad shape FCP904 and spec 137.9mm wide, 53.0mm high (radial depth46.0mm) and 18.5mm thick
First quote back is $254 excl postage,a bit steep but rumours of a sister co who may stock Hawk and Brembo equivalents is keeping me on hold.
Pad shape FCP904 and spec 137.9mm wide, 53.0mm high (radial depth46.0mm) and 18.5mm thick
First quote back is $254 excl postage,a bit steep but rumours of a sister co who may stock Hawk and Brembo equivalents is keeping me on hold.
95 Lighty Bb4
92 Bb2/4 Si Vtec daily slogger
92 Bb2/4 Si Vtec daily slogger