ATR/Legend Front Pad Fitting Kit

Post by **NafemanNathan** » Tue Jul 28, 2015 11:28 am

I''ve robbed this picture from @Drax to illustrate what I'm after.

Drax wrote:

I'm after a new front pad fitting kit for a set of ATR/Legend calipers, but none of the top spring plates I'm seeing look like what's existing (Like Drax's). I can imagine there could easily be a redesign for such a thing regarding its shape, but just to be sure they'll fit, what have other people bought when refurbing ATR/Legend calipers.

Post by **Drax** » Tue Jul 28, 2015 12:10 pm

hmm this link mentions a RAYBESTOS kit if it helps

http://www.preludepower.com/forums/show ... p?t=343434

looks like bigred only does the seals and piston

http://www.biggred.co.uk/catalogue.php

Post by **Merlin** » Tue Jul 28, 2015 12:30 pm

I don't have the spring plates on my ATR calipers. I know they should be there.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Tue Jul 28, 2015 5:11 pm

I've looked into this before. Sure I found a supplier on eBay in the end (not biggred or brakes international).
I need to purchase some also, so hoping I can find it again (didn't buy any at the time...)

Post by **ek9sid** » Tue Jul 28, 2015 5:17 pm

As do I

Post by **Donald** » Tue Jul 28, 2015 5:37 pm

Please post up a link if you find any, as I think I'm missing one or both on my NSX calipers (another avenue for you to look at since NSX = Legend basically).

Post by **ek9sid** » Tue Jul 28, 2015 6:30 pm

Just nsx are mounted to the front whereas legend is mounted to the rear (ooh err)

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Tue Jul 28, 2015 7:00 pm

According to mintex you want kit mba 1203.
Here for example

Post by **Donald** » Tue Jul 28, 2015 7:20 pm

That page takes you to 6th gen Accord stuff

CARRisma · Post by **CARRisma** » Tue Jul 28, 2015 7:58 pm

I've looked into getting a pair of these in the past. Spent hours on eBay but could not find an exact match. I THINK the part number is 45227-SL0-013, but at £25.10 each (according to Lings), Honda can go fvck themselves.

Anyway, I've had my ATR calipers fitted since December 2012 without any issues hence why I'm reluctant to fork out over £50 at Honda for something that isn't 100% necessary. If they were cheaper, perhaps an aftermarket item, then I might be more tempted to satisfy for OCD / perfectionist tendencies.

wurlycorner wrote:According to mintex you want kit mba 1203.
Here for example

The pictured brake pad springs in those links look like those that come with the single piston Prelude calipers (different shape / design).