Passenger side engine mount 92-96 2.2

Post by **Merlin** » Wed Apr 08, 2015 9:44 am

Are you referring to the holes in the top of the mount? Other than those there will be nothing different between the mounts that me and Vanzep has.

Post by **vanzep** » Wed Apr 08, 2015 4:34 pm

thats what i have been saying as well - there should be no difference

i have measured the distance centre to centre on the hole in the mount body to the hole on the mount flange at 65.5mm thats on the side thats facing towards the front of the engine bay - so a quick measurement by hoppi should clear this up

Post by **Merlin** » Wed Apr 08, 2015 4:42 pm

I just checked and my one does have a different casting stamp, its 3BU. But I am still positive that it will be the same. Why would it be any different.

hoppi05 · Post by **hoppi05** » Wed Apr 08, 2015 5:12 pm

we just measured the one we have and its 60mm bang on so there may well be a difference

VanZep can i have your paypal details so you can get this to me? and how much are you wanting?

thanks for all the help once again guys it is very much appreciated.

hoppi05 · Post by **hoppi05** » Wed Apr 08, 2015 5:14 pm

i am still sure like you guys that there should be no difference here but its worth the try b4 we break the drills out.

Post by **vanzep** » Wed Apr 08, 2015 5:22 pm

ok will drop u a pm

Post by **Merlin** » Thu Apr 09, 2015 9:01 am

After thinking it about it they will deffo be the same. I bought I set of engine mounts from Innovative Mounts and you didn't have to specify what car they were for only 4th or 5th gen H22.

vanzep wrote:i have measured the distance centre to centre on the hole in the mount body to the hole on the mount flange at 65.5mm thats on the side thats facing towards the front of the engine bay

I get the same measurement on the one I have here.

hoppi05 · Post by **hoppi05** » Fri Apr 10, 2015 8:21 pm

haha or well we will have to see it may be the delsol is 1cm wider than standard EG/DC2's??