Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

the wifes EK civic - d16y8 turbo
- lucas
- Posts: 1061
- Joined: Sat Jan 28, 2012 3:27 pm
- My Generation: 4G
- XBOX GamerTag: I Lucas L
- Location: Glasgow
- Has thanked: 1 time
- Been thanked: 5 times
- Contact:
Re: the wifes EK civic - d16y8 turbo
Tah manDoggo wrote:Looking great.(Except your intercooler tubes are an abomination.)




- lucas
- Posts: 1061
- Joined: Sat Jan 28, 2012 3:27 pm
- My Generation: 4G
- XBOX GamerTag: I Lucas L
- Location: Glasgow
- Has thanked: 1 time
- Been thanked: 5 times
- Contact:
Re: the wifes EK civic - d16y8 turbo
Thank you Sailor, We appreciate the kind wordsSailor wrote:I've just read this thread through. I'm impressed by the way you two go about things and the results you achieve.
Well done, both.


- claymore68
- Posts: 366
- Joined: Sun Jan 13, 2013 5:24 pm
- My Generation: 5G
- PSN GamerTag: claymore68
- Has thanked: 3 times
- Been thanked: 4 times
- Contact:
- lucas
- Posts: 1061
- Joined: Sat Jan 28, 2012 3:27 pm
- My Generation: 4G
- XBOX GamerTag: I Lucas L
- Location: Glasgow
- Has thanked: 1 time
- Been thanked: 5 times
- Contact:
Re: the wifes EK civic - d16y8 turbo
I'm sure you can take alot of inspiration from it
If you ever need a hand I'm only down the road from you if I remember right ?

If you ever need a hand I'm only down the road from you if I remember right ?

- lucas
- Posts: 1061
- Joined: Sat Jan 28, 2012 3:27 pm
- My Generation: 4G
- XBOX GamerTag: I Lucas L
- Location: Glasgow
- Has thanked: 1 time
- Been thanked: 5 times
- Contact:
Re: the wifes EK civic - d16y8 turbo
So the front bumper suffered a tad with the intercooler and it was sagging.
When I mounted it the first time I didn't have brackets so I found so bits of metal to make do untill I got more appropriate ones
This is what I came up with haha

Not pretty I know lol..
But for £7 on eBay I got some splitter brackets/rods and they look miles better !


And to stop the intercooler pulling the bumper down I found a good bracket & mounted it in the middle

Quick Job done for today
It sits much better now and it's not pulling on the bumper

Pity the silicone has lost all the colour
I
Going to order some pipe for it maybe
When I mounted it the first time I didn't have brackets so I found so bits of metal to make do untill I got more appropriate ones

This is what I came up with haha

Not pretty I know lol..
But for £7 on eBay I got some splitter brackets/rods and they look miles better !


And to stop the intercooler pulling the bumper down I found a good bracket & mounted it in the middle

Quick Job done for today

It sits much better now and it's not pulling on the bumper

Pity the silicone has lost all the colour

I
Going to order some pipe for it maybe


- lucas
- Posts: 1061
- Joined: Sat Jan 28, 2012 3:27 pm
- My Generation: 4G
- XBOX GamerTag: I Lucas L
- Location: Glasgow
- Has thanked: 1 time
- Been thanked: 5 times
- Contact:
Re: the wifes EK civic - d16y8 turbo
Started the battery relocation today
Not got all the bits yet but got to make a start at least.
3m 240a 32mm2 batt cable

Fused Distrubition block 1x 0g & 2x 4g

So got the batt cable fed behind the passenger side pastics, so comes out perfect to go behind the glovebox
I forgot to mention the fuse box has been moved to behind the glovebox and is all pluged in
Anyway, got it pluged up to..

Red batt cable going to the boot, which the alt cable will join to later..
Top black wire from the distrubition block going to the starter and the bottom white cable at the bottom loops round the fuse box to the left terminal
Got a new small battery ordered that comes with a bracket for the boot, and ordered a 150a breaker for just next to the batt !
Also got fuses on the way, will get the alternator wired up tomorrow

Not got all the bits yet but got to make a start at least.
3m 240a 32mm2 batt cable

Fused Distrubition block 1x 0g & 2x 4g

So got the batt cable fed behind the passenger side pastics, so comes out perfect to go behind the glovebox

I forgot to mention the fuse box has been moved to behind the glovebox and is all pluged in

Anyway, got it pluged up to..

Red batt cable going to the boot, which the alt cable will join to later..
Top black wire from the distrubition block going to the starter and the bottom white cable at the bottom loops round the fuse box to the left terminal

Got a new small battery ordered that comes with a bracket for the boot, and ordered a 150a breaker for just next to the batt !
Also got fuses on the way, will get the alternator wired up tomorrow

- lucas
- Posts: 1061
- Joined: Sat Jan 28, 2012 3:27 pm
- My Generation: 4G
- XBOX GamerTag: I Lucas L
- Location: Glasgow
- Has thanked: 1 time
- Been thanked: 5 times
- Contact:
Re: the wifes EK civic - d16y8 turbo
Haha nothing pro about this man, Ghetto to the max
Still need to keep it safe though


Still need to keep it safe though

