Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Problem when braking
- MaccaIRL
- Posts: 773
- Joined: Mon Dec 01, 2014 9:04 pm
- My Generation: 5G
- XBOX GamerTag: MaccaIRL
- Location: Belfast
Problem when braking
Weird feeling on the brake pedal but only 1/5 times i apply brakes
Feels like abs kicking in but no warning light on dash :/
Mechanic said it was warped discs and low pads so replaced the fronts and its still doing it
Anyone any ideas?
Flew through mot except for 2 upper steering arms (i think) and a balljoint all of which replaced
Car does pull to one side on occasion too but put that down to wheels needing alligned
Thanks in advance
Feels like abs kicking in but no warning light on dash :/
Mechanic said it was warped discs and low pads so replaced the fronts and its still doing it
Anyone any ideas?
Flew through mot except for 2 upper steering arms (i think) and a balljoint all of which replaced
Car does pull to one side on occasion too but put that down to wheels needing alligned
Thanks in advance
Lude-behaviour!
- vanzep
- Supporter 2016
- Posts: 7152
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 309 times
- Been thanked: 514 times
There is a section in the manual on how to test your brake booster and master cylinder.
Ive had a few issues with brakes and finally sorted it out by fitting a new master cylinder. Had intermittent problem with pedal going to the floor normally in low speed town traffic was down to perished seal(s) in the mc. However my lude is a BB4 with no abs,tcs or 4ws so not a lot to check to find the problem but as your not getting any fault codes/warning lights it could be the same issue.
Ive had a few issues with brakes and finally sorted it out by fitting a new master cylinder. Had intermittent problem with pedal going to the floor normally in low speed town traffic was down to perished seal(s) in the mc. However my lude is a BB4 with no abs,tcs or 4ws so not a lot to check to find the problem but as your not getting any fault codes/warning lights it could be the same issue.
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 4 times
- Contact:
get the alignment done first then go from there
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens![]()
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html
- hondaman
- Posts: 270
- Joined: Mon Aug 11, 2014 6:13 pm
- My Generation: 4G
- Location: In a world of confusion
If it is warped discs the pedal will pulse when you apply the brakes if you just chaged the pads this won't stop the discs being warped , you'll need new discs as well.
"life is just a bet on a race, between the lights"
The Toys
Honda Prelude 2.2 vtec (work on-going)
Ford Mustang GT V8 - Shortly
YeeeHaaaa
Honda Fireblade 929 - SOLD
Ford Cougar Coupe - SOLD
The Toys
Honda Prelude 2.2 vtec (work on-going)
Ford Mustang GT V8 - Shortly

Honda Fireblade 929 - SOLD
Ford Cougar Coupe - SOLD
- MaccaIRL
- Posts: 773
- Joined: Mon Dec 01, 2014 9:04 pm
- My Generation: 5G
- XBOX GamerTag: MaccaIRL
- Location: Belfast
Re: Problem when braking
Pads and discs changed on fronthondaman wrote:If it is warped discs the pedal will pulse when you apply the brakes if you just chaged the pads this won't stop the discs being warped , you'll need new discs as well.
And no its just randomly, in traffic at 10mph get it sometimes, at 70mph on motorway i get it sometimes
Only difference / change at all is at higher speeds the bumps or whatever get more rapid... at 10mph you feel like youre in a learner car and they cant use the clutch lol
Its not as bad as it was now i have the warped discs and stuff replaced but its still there
As i said, flew through mot even with this happening so braking efficiency and all is passable
Will check to see if i have the mot slips and post the brake efficiency here
Lude-behaviour!
- MaccaIRL
- Posts: 773
- Joined: Mon Dec 01, 2014 9:04 pm
- My Generation: 5G
- XBOX GamerTag: MaccaIRL
- Location: Belfast
Re: Problem when braking
Brake efficiency at mot before pads and discs changed
Axle 1 (sb)
N/S 3.24 kN
O/S 3.51kN
Imbalance 8%
Brake fluctuation
N/S - 6%
O/S - 9%
Axle 1 (sb)
N/S 3.24 kN
O/S 3.51kN
Imbalance 8%
Brake fluctuation
N/S - 6%
O/S - 9%
Lude-behaviour!