Koni Shocks & Eibach springs, 4g Takase spats

Post by **Vtecmec** » Wed Sep 10, 2014 11:45 am

Drax wrote:if your lude doesn't have TCS I don't think this Spoon ecu will work sorry

It will work, no problems. I used to have one in mine.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Wed Sep 10, 2014 12:03 pm

Does it not affect the tachometer? (in the same way that if you put a non-TCS ECU in a TCS car, the tacho doesn't work unless you modify the wiring?)

Post by **Drax** » Wed Sep 10, 2014 12:44 pm

Vtecmec wrote:
Drax wrote:if your lude doesn't have TCS I don't think this Spoon ecu will work sorry
It will work, no problems. I used to have one in mine.

was it a 4 plug ecu for the added TCS or a standard 3 plug?

wurlycorner wrote:Does it not affect the tachometer? (in the same way that if you put a non-TCS ECU in a TCS car, the tacho doesn't work unless you modify the wiring?)

im pretty sure this is the case, plus you don't get any working rev counter either as when I bought a P72 I had to rewire 1 cable for it to work in my 4 plug ecu loom

Post by **Vtecmec** » Wed Sep 10, 2014 12:48 pm

Drax wrote:was it a 4 plug ecu for the added TCS or a standard 3 plug?

It was a 4 plug original Spoon ECU, connected to a car that was formerly an automatic but had been converted to a manual.

Post by **Drax** » Wed Sep 10, 2014 2:06 pm

Vtecmec wrote:
Drax wrote:was it a 4 plug ecu for the added TCS or a standard 3 plug?
It was a 4 plug original Spoon ECU, connected to a car that was formerly an automatic but had been converted to a manual.

im pretty sure standard p13's, most Spoon Ecu's etc. are 3 plug. mine was originally an auto as well, converted to a manual.

TopPrelude · Post by **TopPrelude** » Wed Sep 10, 2014 8:30 pm

Cool, thanks chaps.

If the P13 ecu you have is in full working order, for jdm manual prelude vtec then i will gladly take it off your hands for £20. Pm me payment details fella.

Post by **Drax** » Wed Sep 10, 2014 9:04 pm

TopPrelude wrote:Cool, thanks chaps.

If the P13 ecu you have is in full working order, for jdm manual prelude vtec then i will gladly take it off your hands for £20. Pm me payment details fella.

no probs mate, i will test it on a mates 4g jdm lude tomorrow to double check it works and then PM you details for payment and you can reply with a postal address

TopPrelude · Post by **TopPrelude** » Thu Sep 11, 2014 1:10 pm

Drax wrote:
TopPrelude wrote:Cool, thanks chaps.

If the P13 ecu you have is in full working order, for jdm manual prelude vtec then i will gladly take it off your hands for £20. Pm me payment details fella.
no probs mate, i will test it on a mates 4g jdm lude tomorrow to double check it works and then PM you details for payment and you can reply with a postal address

Thanks.

Post by **Drax** » Mon Sep 15, 2014 3:55 pm

HKS cone & Samco reducer with metal pipe adapter added

Post by **Drax** » Thu Sep 25, 2014 3:58 pm

4g models now on ebay

http://www.ebay.co.uk/itm/181527693240? ... 1555.l2649