Honda Legend calipers

Post by **Drax** » Tue Apr 01, 2014 10:58 pm

im looking to buy Honda Legend calipers, ive found Rob's link on what he roughly did with his but im after a bit more detail - are the a straight swap and fitment together with the old setup, no changes needed? appart from the disks and pads of course.
plus any recommendations for them - with the correct sizes for this setup.

thank you

Post by **NafemanNathan** » Tue Apr 01, 2014 11:07 pm

Simple bolt on, but the left runs upside down on the right and vice versa.

Post by **Vtecmec** » Tue Apr 01, 2014 11:16 pm

Does that mean you have to temporarily hang the caliper upside down to bleed it?

Post by **Drax** » Thu Jul 17, 2014 12:36 pm

I know the legend disks are slightly thicker than standard lude ones, so I shall need to order legend disks - but what size are the pads? are they bigger, or could I re-use lude ones?

bristol_bb4 · Post by **bristol_bb4** » Thu Jul 17, 2014 1:34 pm

I used integra type r pads

Post by **Drax** » Thu Jul 17, 2014 2:07 pm

bristol_bb4 wrote:I used integra type r pads

dc5 I presume...?

as im sure the dc2 brakes are smaller and lude ones are an upgrade for them.

cheers though matey!

Post by **DaveyBa8** » Thu Jul 17, 2014 10:26 pm

DC2s 96 specs 4 stud are 282mm same as BB4/BB1s,

98 spec are bigger, there also 5 stud maybe 300mm but not quiet sure.

GOONIESnvrSAYdie · Post by **GOONIESnvrSAYdie** » Thu Jul 17, 2014 11:23 pm

Legend better than ATR?

Dino · Post by **Dino** » Fri Jul 18, 2014 10:38 am

jdm/ukdm 98 spec dc2 uses yhe same pad as legend, ATR and vtec Preludes.
im removing my legend calipers this weekend..so i have a set if youre interested Dan.

Post by **Drax** » Fri Jul 18, 2014 11:08 am

Dino wrote:jdm/ukdm 98 spec dc2 uses yhe same pad as legend, ATR and vtec Preludes.
im removing my legend calipers this weekend..so i have a set if youre interested Dan.

ah ha!! that's what my research showed but I was still confused (easily done!!

) with some of the pad sizes, thanks for clearing that up Marc

so I can just use standard h22 vtec lude pads... eeeexcellent.

btw what about disks for the legend as if you order legend disks they come in a 5 stud format