rear ARB

Post by **Drax** » Fri Jun 06, 2014 10:36 am

si import wrote:If you could do that some time it would be a big help mate

no problemo, ill put it in the dairy

if this ends up being correct fitting for a lude, I have a mate that works there so could get a discount for you hopefully, plus if there is a group amount of interest im happy to order several and apply (if he can) the discount he gets to them all

Merlin wrote:You will probably find that the pic on Demon Tweeks is not for a Prelude

very true, tweeks are good for doing that

Post by **Merlin** » Fri Jun 06, 2014 10:47 am

GreenyUK wrote: Are ok few lol. What size are the arbs on the Ludes?

23mm on the rear 25mm on the front

One the Whiteline site they are selling them for £160 too. I am positive that they used to be £200.

I think the Pic Whiteline has is the real thing.

It doest have the adjustment holes. My Whiteline ARB's doesn't have adjustment holes.

Post by **Drax** » Fri Jun 06, 2014 11:12 am

Merlin wrote:
GreenyUK wrote: Are ok few lol. What size are the arbs on the Ludes?
23mm on the rear 25mm on the front

One the Whiteline site they are selling them for £160 too. I am positive that they used to be £200.

I think the Pic Whiteline has is the real thing.

It doest have the adjustment holes. My Whiteline ARB's doesn't have adjustment holes.

odd

mine has x3 adjustment holes and was advertised as a 24mm, whiteline must do them as their site says they used to do one for the 3g in 24mm
http://www.whiteline.com.au/product_det ... mber=BHF31
but ive been wrong about these things in the past lol

although mine was also advertised for a 5g, but after research I found it fitted my 4g.

Post by **Merlin** » Fri Jun 06, 2014 11:16 am

My rear Whiteline ARB uses the 23mm OEM sized bushes that Energy Suspension sells

http://www.energysuspensionparts.com/pr ... od=16.5122

My ARB's are far from new though. I am at least the 3rd owner of them so they could be quite old.

Post by **newkid** » Fri Jun 06, 2014 11:40 am

Drax, the rear on the 4th and 5th gen are the same fitment, only the fronts are different.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Fri Jun 06, 2014 11:57 am

indigolemon wrote:
wurlycorner wrote: and all 2.3's are BB1 aren't they?
BB2 - but they should all have 4WS

school boy error. Understood the point about 4ws though

Post by **Drax** » Fri Jun 06, 2014 3:08 pm

Merlin wrote:My rear Whiteline ARB uses the 23mm OEM sized bushes that Energy Suspension sells

http://www.energysuspensionparts.com/pr ... od=16.5122

My ARB's are far from new though. I am at least the 3rd owner of them so they could be quite old.

your more likely to be right Merl

but I shall measure mine when I get home, could be interesting - my guess is that it "said" 24mm but was probably 23mm

lol!!

newkid wrote:Drax, the rear on the 4th and 5th gen are the same fitment, only the fronts are different.

correct, that's the info I found out before I purchased it

Post by **GreenyUK** » Fri Jun 06, 2014 7:30 pm

Merlin wrote:
GreenyUK wrote: Are ok few lol. What size are the arbs on the Ludes?
23mm on the rear 25mm on the front

One the Whiteline site they are selling them for £160 too. I am positive that they used to be £200.

I think the Pic Whiteline has is the real thing.

It doest have the adjustment holes. My Whiteline ARB's doesn't have adjustment holes.

Cool thank you very Merlin!

mart609 · Post by **mart609** » Fri Jun 06, 2014 11:47 pm

progress now do a 27mm rear

http://www.funkypower.co.uk/catalogue.p ... oduct=5308

Funkypower still sell the Tanabe front and rear ARBS for £215 each

Post by **Thebusofwoe** » Fri Jun 06, 2014 11:53 pm

Ill be up for a rear one if it turns out it will fit