Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Ratty's Type S...Jap Performance Magazine porno

Tell us all about your Lude, you know you want to ...
newkid
Supporter 2016
Posts: 2665
Joined: Thu Feb 23, 2012 8:28 pm
My Generation: 4G
PSN GamerTag: spaz_ma_taz
Location: Edinburgh
Has thanked: 13 times
Been thanked: 50 times

Post by newkid » Tue May 13, 2014 6:18 pm

Amazing, totally love it, from how it started to now is amazing! +rep from me

User avatar
honda-hardy
Club Cartographer
Posts: 6268
Joined: Sat Jan 28, 2012 7:35 pm
My Generation: 5G
Location: chippenham
Been thanked: 1 time

Post by honda-hardy » Tue May 13, 2014 6:36 pm

Meh.

User avatar
W1ggz
Posts: 2524
Joined: Sun Jul 22, 2012 3:10 pm
My Generation: 4G
PSN GamerTag: W1GGZ
Location: Portishead nr Bristol
Contact:

Re: Ratty's Type S - Positive Displacement pumped

Post by W1ggz » Tue May 13, 2014 6:52 pm

Looks really good mate loving the white on white

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21506
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 2501 times
Been thanked: 313 times

Post by wurlycorner » Tue May 13, 2014 7:30 pm

I suppose you think that looks sexy, don't you...


What's the figures at the fly and take it you managed to get the emangle to properly tune then?

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 124 times

Post by NafemanNathan » Tue May 13, 2014 7:51 pm

Yours is going to be the angel to my dark knight 8-)

Great effort on the wheels bud. I'll treat mine when I've got the time :)

User avatar
RattyMcClelland
Moderator
Posts: 9208
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 203 times

Re: Ratty's Type S - Positive Displacement pumped

Post by RattyMcClelland » Tue May 13, 2014 9:21 pm

Im not finished with it yet.
Im not 100% happy with it.

I dont know the fly power due to it being a hub dyno. Thor Racing remapped the Greddy.

The supercharger has added so many more new noises that im mistaking as bad. Such as pulley noises, rotor noises specially when its hot and alot of vacuum noises.

at idle IAT are at 50deg C, cruising around 55-60 and on boost/after boost they can hit as high as 75deg C :o :o :o .
So i need to either charge cool and water/meth injection.
I still need to wrap the header and i might put the OEM Type S intake back on so it draws cold air in and help a few degrees.

The charger does not change the character of the engine either. VTEC is absolutely insane and really screams and the crossover is very aggressive.
Its just like a normal H22 but with bags more torque before VTEC and more power up top. VTEC and the rev limiter as kepts as stock.
But you cannot hit the thottle in any gear and go oike some diesels still. Its still needs to build up boost so torque doesnt really come in until 2.5k.

Also can someone give me their opinion.
On WOT between 3k and stock VTEC crossover A/F ratios are around 14.7 to 13.8 and then go to 12.5 and 11.8 @7000rpm when in VTEC. Is that a little lean in the midrange especially when im at 8.4psi then. In VTEC its fine and im at 6.3psi then.
Also when maintianing high speed like 70mph or 80/90mph on the motorway the A/F ratios lean out to as much as 20.1 when im almost off throttle but not and heading downhill or a flat level motorway. When the road inclines a bit and i touch the throttle a little harder the A/F hit 14.7ish.
Cold start is body lemonade poor too. Very lean and jumpy until its warmed up but cold start is difficult to tune on piggy back. I usually wait 2mins at idle and wait for it to warm up.
Image

User avatar
mercutio
LotM Winner
Posts: 14958
Joined: Sun Aug 08, 2010 8:45 pm
My Generation: 5G
Location: Sunny Manchester
Has thanked: 1 time
Been thanked: 4 times
Contact:

Post by mercutio » Tue May 13, 2014 9:26 pm

i honestly think you need to go full standalone buddy it sounds like the ecu is fighting with the greddy as modern engines and ecu's always lean out if your driving along and take your foot off the throttle the engine uses almost no fuel at all so it would make sense that the ratios would lean out until you touched the throttle again
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens :D :lol:
Dino wrote:I loves the 5th gen really.... just dont quote me on it... ;)
4thgenphil wrote:Mines 4 1/4 unches mate, sorry

http://www.ludegeneration.co.uk/profile ... -t618.html

User avatar
RattyMcClelland
Moderator
Posts: 9208
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 203 times

Re: Ratty's Type S - Positive Displacement pumped

Post by RattyMcClelland » Tue May 13, 2014 9:43 pm

mercutio wrote:i honestly think you need to go full standalone buddy it sounds like the ecu is fighting with the greddy as modern engines and ecu's always lean out if your driving along and take your foot off the throttle the engine uses almost no fuel at all so it would make sense that the ratios would lean out until you touched the throttle again
They way it works is. the tuner got the Greddy to get a good balance with the Stock ECU. When i unplug the battery and start again the tuner said it will take a fair few miles before it becomes balanced again and might run rough.

Also if it does sway the tune said we can change the stock o2 sensor to a modifyed one so it fools the stock ECU into thinking the engine is running perfect fuel ratios all the time and let the greddy do everything else via my wideband. :geek:
Image

User avatar
mercutio
LotM Winner
Posts: 14958
Joined: Sun Aug 08, 2010 8:45 pm
My Generation: 5G
Location: Sunny Manchester
Has thanked: 1 time
Been thanked: 4 times
Contact:

Post by mercutio » Tue May 13, 2014 9:48 pm

might be better trying that then
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens :D :lol:
Dino wrote:I loves the 5th gen really.... just dont quote me on it... ;)
4thgenphil wrote:Mines 4 1/4 unches mate, sorry

http://www.ludegeneration.co.uk/profile ... -t618.html

User avatar
Rudelude
Posts: 994
Joined: Thu Apr 17, 2014 10:44 pm
My Generation: 5G
Location: New York

Post by Rudelude » Tue May 13, 2014 10:29 pm

Great Job on wheels and nicely decked..... Can't wait for my springs to arrive....
1997 Type S, Pearl White
Rust Free & Mugen Goodness

Post Reply

Return to “Lude Profiles”