Konig Hurry

bb1boy · Post by **bb1boy** » Mon Sep 16, 2013 4:06 pm

Dbo wrote:bore size is take a ruler with you m8 mine were 67.1 rim bore and 64.1 hub
but the Ats i had were 64.1 rim and the Boss redlines i have now are 73.1 rim

aftermarket alloys love messing around with hub bore so measure that they are bigger than 64.1 and do as i did and took one rim in carparts centre and tried all spigots till i got the right ones

2 sets of spigots i tried were right size whole but the rim bore was camfered angle on whole so had to match the 15% degree on spigots

Bugger, I should have read this AGAIN, I ordered 73.1 to 64.1 spigot rings ..I have a feeling that I have got the wrong size

- all info I could find online about Konig wheels said they all have a 73.1 bore

Dbo · Post by **Dbo** » Mon Sep 16, 2013 4:16 pm

just measure one of yours m8

maybe the hurry2 you have as per blue sticker are 73.1 as made after they all agreed to a standard bore hole size

my email from them stated that they would fit prelude as were standard fitment for a mitzo lancer and as such were made to fit their oem hubs at 67.1, but if yours were made for anyfit aftermarket they probaly are 73.1

bb1boy · Post by **bb1boy** » Mon Sep 16, 2013 4:18 pm

Thanks mate, that's quite reassuring, I will measure one when I get home. I have ordered the spigots already though, oops..

Dbo · Post by **Dbo** » Mon Sep 16, 2013 4:22 pm

i cheated and went into a shop and made the poor guy get out thier entire range of rings and stood there with a rim and tried them all till i got the right ones

then to take the body lemonade the ones that fitted were PINK

so i said can you order these in blue for me as dont want pink on my car

kebab thought i was being serious

W1ggz · Post by **W1ggz** » Mon Sep 16, 2013 5:13 pm

So far the spigot rings that were on my original 18s have fitted three other sets of wheels including my konigs

bb1boy · Post by **bb1boy** » Tue Sep 17, 2013 9:44 am

I popped the old spigot rings out last night, they had 73.1 stamped on them, thankfully!! New SR's should be here tomorrow, then I need to get the old tyres swapped over from my current wheels and paint the lips white

bb1boy · Post by **bb1boy** » Wed Sep 18, 2013 10:28 am

Change of plan here - the new spigot rings arrived so I gave the wheels a good clean up and some paint started flaking off the centre around the bolt holes

so it looks like I'm painting the whole wheels now and not just the lip. I had the tyres pulled off this morning on my way to work so I can get busy with the sandpaper later on

Dbo · Post by **Dbo** » Wed Sep 18, 2013 10:46 am

Please dont tell me you are going to flock them to match the bumper

although

i would do the whole bottom

wheels flocked, front bumper, rear bumper, side skirts all flocked

just go FLOCKING mad

bb1boy · Post by **bb1boy** » Wed Sep 18, 2013 10:54 am

hahaha no mate, while I do like flock, I think I have enough on my car already.. plus if I ever wanted to strip it off it would ruin my paint underneath, especially on the sideskirts. You can buy velvet vinyl now though which looks and feels like flock but is on a self adhesive sheet!

My plan is to paint the wheels satin black with a gloss white lip

bb1boy · Post by **bb1boy** » Wed Sep 18, 2013 12:16 pm

..well, that was my plan unti lI saw these:

Decisions, decisions.. although with my black flocked bumper and black windows, I think black and white wheels are the way to go.

Lude Generation

Konig Hurry

Re: Konig Hurry