Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Massive oil leak help

Engine/Gearbox questions and discussion
User avatar
paul72
Supporter 2014
Posts: 842
Joined: Tue May 14, 2013 7:39 pm
My Generation: 4G
Location: Chard , somerset

Massive oil leak help

Post by paul72 » Sun Jul 07, 2013 9:07 pm

Me an mrs travelled all the way to mansfield to pick up bumper from do1jonnyt then back down to donington park ready for japfest 2 an had no problems at all but on way back today we pulled over into services to get drink when we found car was smoking like it was on fire from everywhere , i opened bonnet where more smoke was but cudnt see anything so looked underneath and theres oil pissing everwhere all over floor an exhaust . Now i cant see anything leaking on top of engine at all an cant make out where its coming from but to cut long story short i checked oil had half left so decided to drive at low revs 55mph all way home but now it doesnt leak so only does it high revs . Any ideas people :(
Last edited by paul72 on Sun Jul 07, 2013 10:31 pm, edited 1 time in total.
if it aint broken your not driving it hard enough

User avatar
vanzep
Supporter 2016
Posts: 7152
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 309 times
Been thanked: 514 times

Post by vanzep » Sun Jul 07, 2013 9:29 pm

sounds like your oil cooler o ring - this is located behind your oil filter - if it leaks it drops onto the downpipe of the exhaust giving off a load of smoke. good news is its only a few quid from honda for the oring and should be a 10 minute job for a garage to do. Hopefully thats what it is :)
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
paul72
Supporter 2014
Posts: 842
Joined: Tue May 14, 2013 7:39 pm
My Generation: 4G
Location: Chard , somerset

Post by paul72 » Sun Jul 07, 2013 9:34 pm

This mite sound stupid but do you mean take the oil filter out and its behind that. Plus hoping i can do it at work so wont cost anything except parts :D
if it aint broken your not driving it hard enough

User avatar
vanzep
Supporter 2016
Posts: 7152
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 309 times
Been thanked: 514 times

Post by vanzep » Sun Jul 07, 2013 9:38 pm

its is a job you can do yourself but it can be a bit tricky getting the o ring to stay in place - the oil filter sits ontop of the oil cooler - you will need a deep socket - cant remember the size (32mm?) remove the oil filter and drain the oil get the deep socket onto the bolt and the oil cooler will come off (no need to disconnect any pipes) - the oring will be underneath - take it out and fit the new one etc - easy job if you have a set of ramps at your work.
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
paul72
Supporter 2014
Posts: 842
Joined: Tue May 14, 2013 7:39 pm
My Generation: 4G
Location: Chard , somerset

Post by paul72 » Sun Jul 07, 2013 9:43 pm

Yeah i work at a tyre wholesale so no probs there ill get it up on ramp just hope ill be able to see if its coming from there as the floor an bottom of engine is covered but why is it only doing it on high revs as i wud of thought it wud leak all the time
if it aint broken your not driving it hard enough

User avatar
mercutio
LotM Winner
Posts: 14958
Joined: Sun Aug 08, 2010 8:45 pm
My Generation: 5G
Location: Sunny Manchester
Has thanked: 1 time
Been thanked: 4 times
Contact:

Post by mercutio » Sun Jul 07, 2013 9:46 pm

if its not that it could be the balance shaft oil seal which is a little harder to deal with
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens :D :lol:
Dino wrote:I loves the 5th gen really.... just dont quote me on it... ;)
4thgenphil wrote:Mines 4 1/4 unches mate, sorry

http://www.ludegeneration.co.uk/profile ... -t618.html

User avatar
paul72
Supporter 2014
Posts: 842
Joined: Tue May 14, 2013 7:39 pm
My Generation: 4G
Location: Chard , somerset

Post by paul72 » Sun Jul 07, 2013 9:52 pm

Think its time to get the brake cleaner out an clean it all off to get a better idea of where its coming from
if it aint broken your not driving it hard enough

User avatar
kris_aka_edu
Posts: 1106
Joined: Fri Oct 12, 2012 4:25 pm
My Generation: 4G
XBOX GamerTag: chris aka edu
Location: Biggleswade, Bedfordshire

Post by kris_aka_edu » Sun Jul 07, 2013 10:06 pm

I think Ive got the same problem, I think its a common thing. If you get the part number let me know. Or.. @ddoubledannyhas a part number for me, just need to work out which one it is. They are around £3 from Honda, think thats cheap for a genuine Honda part!

User avatar
Vtecmec
LotM Winner
Posts: 5491
Joined: Fri Aug 06, 2010 5:43 pm
My Generation: 4G
XBOX GamerTag: vtecmec
Location: East Midlands
Has thanked: 149 times
Been thanked: 441 times

Post by Vtecmec » Sun Jul 07, 2013 10:11 pm

If it is the cooler o ring, it sits here...

Image

Part number....

Image

User avatar
paul72
Supporter 2014
Posts: 842
Joined: Tue May 14, 2013 7:39 pm
My Generation: 4G
Location: Chard , somerset

Post by paul72 » Sun Jul 07, 2013 10:28 pm

Thanks for pics that makes it alot easier to know wat too look for :D
if it aint broken your not driving it hard enough

Post Reply

Return to “Engine / GearBox”