ATR brake upgrade

toyracer69 · Post by **toyracer69** » Fri Jun 14, 2013 4:30 am

These are my rear discs....

Just got to bed in the DS2500's now.............................

toyracer69 · Post by **toyracer69** » Sat Jun 15, 2013 7:27 pm

Post by **Thebusofwoe** » Sat Jun 15, 2013 8:25 pm

Sorry to jack the thread. Better that than opening a new one. So to fit the atr fronts on a 4th id need atr calipers and carriers. And re drilled ep3 300mm discs?.
Thanks

Post by **RattyMcClelland** » Sat Jun 15, 2013 8:43 pm

Thebusofwoe wrote:Sorry to jack the thread. Better that than opening a new one. So to fit the atr fronts on a 4th id need atr calipers and carriers. And re drilled ep3 300mm discs?.
Thanks

ATR calipers will fit directly onto Prelude carriers but you can only use the Prelude discs.
To use the bigger ATR discs you need the ATR carriers.

Post by **Thebusofwoe** » Sat Jun 15, 2013 8:47 pm

Ok ta.

nitin_s1 · Post by **nitin_s1** » Sun Jun 16, 2013 5:28 pm

I have got the following:
Front ATR setup (ATR callipers, ATR carriers)
300mm ATR Mintex Front discs with OEM ATR front pads
OEM Rear Discs and Pads
Steel brake lines (HEL, I think)

I guess it's advisable to change the whole brake fluid at the same time as well. So what fluid do I use?

Post by **RattyMcClelland** » Sun Jun 16, 2013 5:56 pm

DOT4 tintin.

nitin_s1 · Post by **nitin_s1** » Tue Jun 18, 2013 1:10 pm

Nice one sexy.. How much do I need? One bottle?

nitin_s1 · Post by **nitin_s1** » Mon Jul 01, 2013 10:40 am

I just got one question..

The whole front ATR brake set-up (Callipers, carriers and discs) would go on the Prelude really easy 'Straight forward'? Like you don't have to bend any dust shield cover etc etc? I only ask as I will have to get my local garage person to fit it.

toyracer69 · Post by **toyracer69** » Mon Jul 01, 2013 12:27 pm

nitin_s1 wrote:I just got one question..

The whole front ATR brake set-up (Callipers, carriers and discs) would go on the Prelude really easy 'Straight forward'? Like you don't have to bend any dust shield cover etc etc? I only ask as I will have to get my local garage person to fit it.

Just remove it otherwise you have to bend it out of the way. And I though I was going to fit it for you????