Being a bit thick..

claymore68 · Post by **claymore68** » Fri Jun 07, 2013 10:06 am

Where would I find my gearbox code as I am trying to ascertain if a H22a will work with my existing box from the 2ltr.
And having this code apparently helps.

Ted · Post by **Ted** » Fri Jun 07, 2013 10:09 am

there is a barcode type sticker near the starter motor on the box and its printed on that. m2b4 is what you need to pray for

but it wont be

Post by **indigolemon** » Fri Jun 07, 2013 10:13 am

Yes, your box will work. Don't need to see the code, they're all interchangeable. My H22 is mated to a H23 box atm.

claymore68 · Post by **claymore68** » Fri Jun 07, 2013 10:22 am

tramroadmotors wrote:there is a barcode type sticker near the starter motor on the box and its printed on that. m2b4 is what you need to pray for but it wont be

What a way to burst someones bubble

Thanks guys Ill check this afternoon

Post by **Vtecmec** » Fri Jun 07, 2013 10:27 am

indigolemon wrote:Yes, your box will work. Don't need to see the code, they're all interchangeable. My H22 is mated to a H23 box atm.

This, my H22 is mated to a 2.0 box.

Post by **Merlin** » Fri Jun 07, 2013 10:33 am

What are the ratio's like on the 2.0 box? What is it's gearbox code?

Post by **Vtecmec** » Fri Jun 07, 2013 10:37 am

I think it's M2J5, sencond gear is looong. You can do 0-60 using only 1st and 2nd gear.

Post by **Merlin** » Fri Jun 07, 2013 10:45 am

M2J4 or M2J5 ?

http://www.ludegeneration.co.uk/wiki/in ... rbox_Codes

Didn't the guy who build the autocross F20b golf use a 2.0 box?

Post by **Vtecmec** » Fri Jun 07, 2013 10:56 am

I'll double check later.

claymore68 · Post by **claymore68** » Fri Jun 07, 2013 2:23 pm

Just checked.. as told by those who know mines is a M2 J4 , so it should be ok