4th gen parts clearout

JDM-BB4 · Post by **JDM-BB4** » Sat Apr 27, 2013 2:56 pm

Lukalude wrote:Alternator arrived today mate, the unorthodox pulley fits just fine! thanks for quick delivery! she lives!

Great to here its fixed your problem and gets you back on the road. Thanks again.

kris_aka_edu · Post by **kris_aka_edu** » Thu May 02, 2013 9:09 pm

Does the accord type r manifold fit a 4th gen 2.2 4ws? And is it still available?

JDM-BB4 · Post by **JDM-BB4** » Fri May 03, 2013 12:04 pm

kris_aka_edu wrote:Does the accord type r manifold fit a 4th gen 2.2 4ws? And is it still available?

@kris_aka_edu yes it's still here.
I believe it does fit straight on to a standard downpipe.
You only need to mod the front crossmember if your fitting the atr downpipe.

Cheers.

Ferdie · Post by **Ferdie** » Fri May 03, 2013 3:53 pm

FAST good and again verry good contact

Many thanks!!

kris_aka_edu · Post by **kris_aka_edu** » Sat May 04, 2013 5:12 pm

Bought a manifold off ddoubledanny

kris_aka_edu · Post by **kris_aka_edu** » Sat May 04, 2013 5:13 pm

Can't crack the bolts on the manifold to the down pipe though! They are tight as a nuns c**t!!

Dbo · Post by **Dbo** » Sat May 04, 2013 5:16 pm

on the oem mani's you have to soak them in wd40 for days and then they stil snap off

kris_aka_edu · Post by **kris_aka_edu** » Sun May 05, 2013 3:52 pm

Yeah I've done one day of soaking, more to go then!!

h10ndr · Post by **h10ndr** » Mon May 06, 2013 9:53 am

JDM-BB4 wrote:
kris_aka_edu wrote:Does the accord type r manifold fit a 4th gen 2.2 4ws? And is it still available?
I believe it does fit straight on to a standard downpipe.
You only need to mod the front crossmember if your fitting the atr downpipe.

The ATR 4-2 will bolt up to a standard downpipe (notching required on crossmember) but it will hang way too low as the ATR 4-2 section is about 2inches longer than a stock 4-2

JDM-BB4 · Post by **JDM-BB4** » Mon May 13, 2013 11:40 pm

h10ndr wrote:
JDM-BB4 wrote:
kris_aka_edu wrote:Does the accord type r manifold fit a 4th gen 2.2 4ws? And is it still available?
I believe it does fit straight on to a standard downpipe.
You only need to mod the front crossmember if your fitting the atr downpipe.
The ATR 4-2 will bolt up to a standard downpipe (notching required on crossmember) but it will hang way too low as the ATR 4-2 section is about 2inches longer than a stock 4-2

Thanks for that.

I had a look at the downpipe that came off the car at the weekend. It seems it was cut and welded at the top under the flange to make it shorter, so you were right. It's a shame the downpipe is pretty battered from speedbumps.