Lude Generation

As above I'm breaking a 91 prelude I've got two so I'm making one good car out of both
Both are white and 1991 one is 4ws 16v manual other is ex carb auto
I'm swapping the engine box and 4ws to the ex as it has the best body
Let me know if anyone needs anything
Will send pics if required of parts requested
Cheers

do you have a white passenger/near side front wing? Could you pop up some pics of the wing and the car. Inside and out. I would Also like the lower rear bumper lip for a pre face lift. I would Also like the 70 amp fuse from the fuse box under the bonnet.

while im at it. Do you have the clock with the little flap attached still. I have the flap but its lost a lug and it sits in my glove box. Where abouts in the country are you?

honda-hardy wrote:do you have a white passenger/near side front wing? Could you pop up some pics of the wing and the car. Inside and out. I would Also like the lower rear bumper lip for a pre face lift. I would Also like the 70 amp fuse from the fuse box under the bonnet.

Yep got the wing afraid the laquer has peeled along the top I think but it's in good nick otherwise

The bumper lips goin on the new car so not available

And the fuse is yours

honda-hardy wrote:while im at it. Do you have the clock with the little flap attached still. I have the flap but its lost a lug and it sits in my glove box. Where abouts in the country are you?

Got the clock and flap unbroken but think its missing a spring to keep it closed will check it today and take pics of all parts for you I'm in Glasgow

i have a small bit of rust coming through so i will sort my wing out. As the spring is missing How much for the flap on its own? Plus the fuse? Cheers for getting back to me.

honda-hardy wrote:i have a small bit of rust coming through so i will sort my wing out. As the spring is missing How much for the flap on its own? Plus the fuse? Cheers for getting back to me.

As a fellow 3rd gen enthusiast and owner of a lovely example you can have them for postage cost

Anything else will cost you though

your truly a gent. you have pm

do you have a working ariel? or a rear jdm plate recess??

cheers Turk

jdm cars have the same size recess as the uk rear bumper. the usdm bumpers had smaller recesses.

my jdm



another jdm



usdm