Page 1 of 2
5g fog light wiring kit?
Posted: Wed Nov 04, 2015 6:56 pm
by Lankysod07
Quick question....
I've bought some oem 5g fogs and have also got the wiring connectors both fogs already wired up to a point, I need a wiring kit that can give me power to them and also come with a switch, any one got one or can point me in the right direction of what I need?
Posted: Sun Nov 08, 2015 6:46 pm
by Lankysod07
Can anyone advise me in this at all? I'm not a pro with electrics and could use some advise on what I need to buy etc
Posted: Sun Nov 08, 2015 6:48 pm
by mercutio
I am sure one of the guys will be along shortly
Posted: Sun Nov 08, 2015 11:47 pm
by newkid
Posted: Mon Nov 09, 2015 8:58 am
by Merlin
If you want to use an OEM switch you need to find one with a pigtail
Posted: Mon Nov 09, 2015 9:04 am
by jjmartin349571
Or some very small female spade terminals, use a bit of heat shrink cut to size to insulate them - that's what I did on my Accord.
Posted: Mon Nov 09, 2015 10:30 am
by Merlin
Nice one!
There you go. Get either a UK/US fog switch (site horizontal in the lower part of the switch bank) or get a JDM fog switch that sits in one of the vertical switch holes. If yo use a JDM switch you need to relocate the cruise control switch (no biggie).
Posted: Mon Nov 09, 2015 10:47 am
by Lankysod07
Nice one guys, write up is great...I can get to this now!
Posted: Mon Nov 09, 2015 11:08 am
by Merlin
I am going to try and recover the pics, they dont seem to be loading. They are stored on crappy Imageshack
Posted: Mon Nov 09, 2015 11:09 am
by benthebratt
Ive got a spare wiring loom if you need it with instructions im no electrician but only took me 15 minutes ! Let me know if you need it