Rear fog pinouts

[newkid]

UKDM rear foglight switch connected to ukdm el dial loom, can anyone tell me what pin does what on the switch with the corresponding colour?

Cheers

[Vtecmec]

Sorry I did not get back to you earlier in the week, had quite lot on this week!

I'll have a look at mine tomorrow if someone does not chime in beforehand.

[newkid]

Mate its cool knew you were busy. Only posted up as hoping to do it tomorrow.

[newkid]

Made a little progress on this, blew the small light fuse tho

What I think I've worked out is

1 red/black dots = earth
2 red/blue = ?
3 red/black/black dots = 12v live when sidelights on as green fog light indicator lights up when lights on and changes to live
4 red/green = ?
5 black/brown dots = ?

5 I presume is the earth for when the switch is engaged so it lights up? correct me if im wrong, but out of 2 and 4 which one is the 12v in and which one is the feed to the rear fog?

Cheers

[newkid]

Did a proper search on here and glad to say I've worked out the wiring thanks to a guide @wurlycorner put up a while ago

Going by the manual found in this thread http://www.ludegeneration.co.uk/post216 ... ng#p216353

A earth
B to rear fog
C live
D live
E earth

Switch in 'off' position d isn't in use even tho its powered, when the switch is in 'on' position it connects d to b and a.

To make things even better c and d are connected to 12v live when sidelights are turned on meaning that it illuminates the fog light symbol as it should at night and the fog can only be on along with the light to indicate its on when in 'on' position if sidelights are on. No chance of draining the battery here then

+ rep to you wurly

[wurlycorner]

glad to be of service... (without even knowing it )