Recommend me some wheels

ATR84 · Post by **ATR84** » Thu Aug 16, 2018 1:31 pm

I am close to buying a 5th gen type S. I have done a few Google searches but there are not many Type S Preludes about so it is hard to get many ideas.

The requirements for the wheels are, that they shouldn't be too expensive, they should be Japanese, and most likely 17 inch. Any ideas welcome.

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Thu Aug 16, 2018 1:34 pm

What sort of budget is 'not too expensive'?
And are you looking for new or used?

Post by **RattyMcClelland** » Thu Aug 16, 2018 1:35 pm

Weds Sa90
Dc5 wheels
Work CR Kiwami

ATR84 · Post by **ATR84** » Thu Aug 16, 2018 2:09 pm

Maybe no more than £800.

What offset do I need as well please guys?

Post by **tom023** » Thu Aug 16, 2018 2:23 pm

Offset depends on how much you are lowered. Between ET42-47 is a safe bet on 7.5J wheels.

Sent from my Redmi Note 4 using Tapatalk

nitin_s1 · Post by **nitin_s1** » Thu Aug 16, 2018 2:40 pm

RattyMcClelland wrote:Weds Sa90
Dc5 wheels
Work CR Kiwami

+1,

DC2 98 Spec wheels
WORK emotions,
Enkei RP01 (there is a set for sale on eBay at £500) same wheels as my set up.

Post by **Merlin** » Thu Aug 16, 2018 2:42 pm

Not an adventurous recommendation but I like Rota's as they are good value and easy to get hold of. Rota's are on my both my Ludes https://www.rarerims.co.uk/

17x17.5 ET45 Slips, Torques, Grids or GTR

I have ET45 on my 5th gen which only just rubs on the tabs on the rear bumper but you can cut them to give more clearance see here http://www.ludegeneration.co.uk/honda-p ... -t535.html

ATR84 · Post by **ATR84** » Thu Aug 16, 2018 4:22 pm

Thanks for the input all.

So is 17x17.5 ET45 a safe bet? I am going to lower it but not excessively, I would rather not get involved with having to cut bits of body work, so what is best?

Post by **tom023** » Thu Aug 16, 2018 4:31 pm

I'm running exactly the same setup as Merlin but they are Rota Titans. I think I got a dodgy batch though because they don't balance up very well.

If you are lowered i have found that it comes down to the tyre if it rubs.
My car rubs the wheel arches slightly now, but didn't on the tyres before (same measurements)

Sent from my Redmi Note 4 using Tapatalk

Max · Post by **Max** » Thu Aug 16, 2018 5:08 pm

ATR84 wrote:Thanks for the input all.

So is 17x17.5 ET45 a safe bet? I am going to lower it but not excessively, I would rather not get involved with having to cut bits of body work, so what is best?

17x17.5 is definitely not a good idea

Lude Generation

Recommend me some wheels

Recommend me some wheels

Re: Recommend me some wheels

Re: Recommend me some wheels