Page 1 of 3
4th Gen - 4WS Reset Procedure, doesn't work?
Posted: Sat Apr 15, 2017 5:01 pm
by arif_manji
Hi guys,
I am trying to do a 4WS reset procedure on my UK 4th Gen following Nitin's guide below:
http://www.ludegeneration.co.uk/honda-p ... -t102.html
Once a short the service connector and you switch on the ignition, the 4WS light comes on and then disappears. It doesn't appear at all after to allow me to do the reset procedure. Anyone know why? It is an auto and its Park (P) for the procedure. Is this correct or does this need to be in Neutral instead?
Any help will be appreciate - thanks!
Re: 4th Gen - 4WS Reset Procedure, doesn't work?
Posted: Sat Apr 15, 2017 5:06 pm
by niny
did you pull handbrake?
Poslano sa mog E5823 koristeći Tapatalk
Posted: Sat Apr 15, 2017 5:48 pm
by arif_manji
Yeah, handbrake is up too. If you put it in Neutral, the 4WS just blinks continuously (very fast).
Re: 4th Gen - 4WS Reset Procedure, doesn't work?
Posted: Sat Apr 15, 2017 6:02 pm
by niny
if you did everything by manual then you have same problem i had, sensor on steering rack, my was burned
Poslano sa mog E5823 koristeći Tapatalk
Posted: Sat Apr 15, 2017 6:24 pm
by arif_manji
niny wrote:if you did everything by manual then you have same problem i had, sensor on steering rack, my was burned
Poslano sa mog E5823 koristeći Tapatalk
Really? How can it get burnt? The 4WS works on mine but after 100-150 miles the light pops on with code 2 or 20. 2 long flashes and then loads of fast flashes.
Posted: Sat Apr 15, 2017 6:39 pm
by arif_manji
Video clip of the attempted 4WS reset procedure:
View My Video
Re: 4th Gen - 4WS Reset Procedure, doesn't work?
Posted: Sat Apr 15, 2017 6:50 pm
by niny
idk how but my did, i had same code 20, replaced mine and worked, also count that fast flashes, sorry can't play video on phone
Poslano sa mog E5823 koristeći Tapatalk
Re: 4th Gen - 4WS Reset Procedure, doesn't work?
Posted: Sat Apr 15, 2017 7:13 pm
by arif_manji
niny wrote:idk how but my did, i had same code 20, replaced mine and worked, also count that fast flashes, sorry can't play video on phone
Poslano sa mog E5823 koristeći Tapatalk
I was told the fast flashes are not important? It's the long flashes that is actually the code?
Sent from my iPhone using Tapatalk
Posted: Sat Apr 15, 2017 9:03 pm
by Vtecmec
Code 20 is a misaligned main angle steering sensor. Park the car with the wheels straight, take the steering wheel off and align the sensor, from memory the yellow sticker points down. The instructions are in the manual anyway.
Re: 4th Gen - 4WS Reset Procedure, doesn't work?
Posted: Sat Apr 15, 2017 9:08 pm
by niny
long flash count 10, fast 1 so if you have 2 long and 5 fast code is 25, i had code 20 for burned sensor on steering rack, code 20 can be for main or sub front sensor
Poslano sa mog E5823 koristeći Tapatalk