Page 1 of 1
Upgrade brake discs on bb9 prelude
Posted: Sun Jul 17, 2016 8:52 pm
by Andy1000
Is it possible to upgrade 4 stud 260mm front discs to 4 stud 282mm discs from bb1-4 prelude and will I also need to upgrade calipers to suit 282mm discs
As looking to replace discs and pads at front and rear off my car
Posted: Sun Jul 17, 2016 9:29 pm
by newkid
You need calipers, carriers, discs and pads bud. I'm local and have a breaker with calipers/carriers coming of a bb8. You will need to slightly modify the backing plates on the bb9 unless you swap them also.
Posted: Sun Jul 17, 2016 11:42 pm
by Andy1000
Newkid
Exactly what I thought apart from upgrading the backing plates.
i am currently upgrading the car in stages at present and yes i would be interested in these parts from the bb8
If you can give me a pm with cost for the parts that would be great
And I can meet up with you at a suitable time to pick them up if that's okay
Hopefully I will then be able to try and find some time to get them fitted to the car at some point as I have still not got around to fitting the shocks that I got from Vanzep.
Cheers
Andy