Lude Generation

im looking to buy Honda Legend calipers, ive found Rob's link on what he roughly did with his but im after a bit more detail - are the a straight swap and fitment together with the old setup, no changes needed? appart from the disks and pads of course.
plus any recommendations for them - with the correct sizes for this setup.

thank you

Simple bolt on, but the left runs upside down on the right and vice versa.

Does that mean you have to temporarily hang the caliper upside down to bleed it?

I know the legend disks are slightly thicker than standard lude ones, so I shall need to order legend disks - but what size are the pads? are they bigger, or could I re-use lude ones?

I used integra type r pads

bristol_bb4 wrote:I used integra type r pads

dc5 I presume...?

as im sure the dc2 brakes are smaller and lude ones are an upgrade for them.

cheers though matey!

DC2s 96 specs 4 stud are 282mm same as BB4/BB1s,

98 spec are bigger, there also 5 stud maybe 300mm but not quiet sure.

Legend better than ATR?

jdm/ukdm 98 spec dc2 uses yhe same pad as legend, ATR and vtec Preludes.
im removing my legend calipers this weekend..so i have a set if youre interested Dan.

Dino wrote:jdm/ukdm 98 spec dc2 uses yhe same pad as legend, ATR and vtec Preludes.
im removing my legend calipers this weekend..so i have a set if youre interested Dan.

ah ha!! that's what my research showed but I was still confused (easily done!! ) with some of the pad sizes, thanks for clearing that up Marc so I can just use standard h22 vtec lude pads... eeeexcellent.

btw what about disks for the legend as if you order legend disks they come in a 5 stud format