Lude Generation

Hello,

Does anybody have a non ATTS ABS computer I can borrow ? I am trying to figure out why my ABS light is on, its not throwing any codes and I want to make sure its not the computer that's at fault. Thanks!

I always assumed you were running a K20 ECU!

NafemanNathan wrote:I always assumed you were running a K20 ECU!

What does that have to do with ABS?

wurlycorner wrote:

NafemanNathan wrote:I always assumed you were running a K20 ECU!

What does that have to do with ABS?

Blonde moment. I don't do ABS Ludes and my head wasn't thinking seperate ECU this morning

Hello,

Still cant find the ABS computer on an ATTS equipped car, can anybody point me in the right direction? Or is it integrated with the ATTS ecu ? Any help is greatly appreciated!!!!

Its in the N/S corner behind the front leg panel.

Thanks, you have confirmed my suspicions I was getting confused when searching for an image in google and loads of different shapes appeared!

Might have one if those here mudgey
Will you confirm the part number,

Thanks Crankmaster II, I don't have the PN's for the non ATTS ECU. What car did it come out of?

I have been tracing wires for my ABS ECU using the workshop manual but have fallen at the first hurdle. It says the ABS ECU connector is a 22pin, however mine is a 26pin, I thought well that would be because of the extra wheel signal wires going to/from the ATTS ECU, but after checking the diagram again it still shows a 22pin connector even with the addition of the ATTS wiring. Does anybody know why mine has a 26pin connector?

The diagram shows terminal 1 as a ground wire, however mine has a solid blue wire with wire 13 Yellow/Black as ignition!?

What I have is ABS ecu out of the type s if it's any good to you