Hi Guys , where best to get new power steering pipe as mine is completely gone to rust heaven. If anyone has one please let me know and if you know where best to purchase also helpful.
Thanks in advance.
Craig
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

2 ltr 5th Gen power Steering Pipe
- claymore68
- Posts: 366
- Joined: Sun Jan 13, 2013 5:24 pm
- My Generation: 5G
- PSN GamerTag: claymore68
- Has thanked: 3 times
- Been thanked: 4 times
- Contact:
- vanzep
- Supporter 2016
- Posts: 7151
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 309 times
- Been thanked: 510 times
Re: 2 ltr 5th Gen power Steering Pipe
There are lots of ps pipes - guess you mean the power steering cooler that sits low down at front of the car on the passenger side?
This is the one that normally rusts - dont think the part is available so most just cut out the old section of rusted pipe and put a loop of rubber hose in there - should be an easy job for any garage to do and should cost pennies
This is the one that normally rusts - dont think the part is available so most just cut out the old section of rusted pipe and put a loop of rubber hose in there - should be an easy job for any garage to do and should cost pennies

1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
- RattyMcClelland
- Moderator
- Posts: 9208
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 203 times
Re: 2 ltr 5th Gen power Steering Pipe
Any power steering cooler should fit assuming you cab support it somehow. It's just attached with 10mm pvc pipes and a few 10mm Bolts to support it.
I think @honda-hardy used a ford power steering cooler.
I think @honda-hardy used a ford power steering cooler.

- honda-hardy
- Club Cartographer
- Posts: 6268
- Joined: Sat Jan 28, 2012 7:35 pm
- My Generation: 5G
- Location: chippenham
- Been thanked: 1 time
- CARRisma
- Posts: 902
- Joined: Tue May 01, 2012 11:30 am
- My Generation: 5G
- Location: Horley, Surrey
- Has thanked: 20 times
- Been thanked: 38 times
- Contact: