Right need to free some space in the garage and some parts have taken a different route, so got lots of goodies to shift…
I can post pretty much all of it or people can pick up at Japfest.
2 x Recaro SR3 Seats
Black material with ‘Confetti’ pattern centres and large white Recaro embroidery - usually found in JDM Toyota Supra’s / Celica GT4’s.
Condition: Usual light bolster wear on the drivers side, but I’ve seen a lot worse! As well as this the passenger side material up near the belt guide has come away slightly. You can tuck it in ok, but it just needs to the guides unclipping and the material glued/stapled back down – easy job just havn’t got round to it in my masses of other stuff to do! No seat mounts / runners included– see my Bride mounts for sale separately.
Was £300
Edit: Reduced to £250 - Japfest pick up special! SOLD to Mart609
I can most likely courier them within the UK at about £30 if people need it or collect from me at Japfest.
1 x Recaro SR3 Seat
Black alcantara material with a funky reddish brown pattern centres and small red Recaro embroidery – From a Mitsibushi Evo 4.
Condition: This single seat is a passenger seat so the condition is really good, bolster starting to wear but nothing like the usual drivers ones. Only real thing to note is it has a small burn hole on the bottom pattern, see pics. Only small, but the rest of the seat is great. No seat mounts/runners included – see my Bride mounts for sale separately.
Was £120
Edit: Reduced to £100
I can post for around £15 or pick up from Japfest.
UKDM front lip – ‘Euro / bubble’ type
Condition: No damage, but needs prep and paint as you can see from pics:
£30
UKDM side skirts – ‘Euro / bubble’ type
Condition: No damage, but needs prep and paint as you can see from pics:
£30
Bride MO low sliding seat mounts – 4th gen direct fitment
Condition: Hardly used. These are about £200 each to buy new and the only off the shelf mount for the 4th gen Prelude. Oh, and they’re Bride! Will enable fitting of any Recaro seat, plus most bucket seats with the addition of most side mounts.
Was £120
Edit: Reduced to £100 (for the pair) Pending Sale
Recaro Mitsibushi Evo 4 seat rails
Thought I’d post them on here, someone may be able to use them to fab to any of the generation Prelude’s mounts for some custom rails? No interest I’ll stick them on ebay.
£30 (for the pair)
Ebay special front strut brace
Condition: Bar is great as I used to keep it polished up for shows, but the feet have started to show signs of surface rust. Needs a sand and repaint.
£10 SOLD to Kris_aka_edu - pending payment and postage
XTD Stage 4 clutch (6 puck paddle type) – sprung type
Condition: Brand new in box! Never used. However, it will come with a second hand release bearing (not that old) and no alignment tool – a couple of quid to buy if you are fitting yourself. If a garage is doing it, don’t worry. This clutch can handle a lot more abuse than the OEM but XTD’s stage 3 and 4 clutches have been run by lightly modded ludes as a cheaper alternative for track days, drag runs and ‘freaking insane driving’. I wouldn’t even bother looking at the Stage 1 & 2 versions.
Was £120
Edit: reduced to £110
Tanabe G Medallion exhaust back box only
Condition: Used, but the previous owner has had the likes of Powerflow repair the piping to the system and the bends are horrendous. Needs cutting after the back box and welding onto a new piece. But cheap for a quality made exhaust (well back box of the original exhaust!)
£30 SOLD to 4thgenphil
Honda keyring – from main dealer
Condition: Brand new in box.
£5 SOLD to Honda-Hardy
I have other bits and pieces I still need to sift through…
Cheers,
Rob
