Lude Generation

Hi does anyone no if can do this. If so is there any bits need swapped. Will be running an obd1 loom. Was thinking swap the injectors out of the atr head for the h22a ones to fit the loom. I read the tps is different and the ideal control valve on the atr head to the h22a. Is there a way round that?

lucas is doing this swap - if you look at the post

You can make up an adaptor plate to fit the iacv at the back of the atr mani - might be a tight fit against the firewall or you can buy a relocation kit from Rosco Racing in USA.
Dont know about the tps but you should be able to swap H22a one onto the ATR mani if needed